Search results

Maybe just try a drop of dishwash soap and warm water to remove the stickiness

is this it? https://www.jimellismazdaparts.com/products/Mazda/BUSH--OUTER/1913259/TD1167407A.html

popping noise when turning can mean worn upper or lower ball joints

I wouldn't worry about it too much, the noise will go away eventually

It is most likely from the iron particles from brake dust, or rail dust from transporting on railroads. You can use a claybar to remove them and then wax the area with a decent polish such as Meguiars or 3M, it will help keep the particles from sticking to the paint.

Just get a random orbital polisher/buffer for around $50 and $20 for a decent polish and $20 for a decent wax (I suggest 3M or Meguiars) It sounds like your swirls aren't very deep so you should be able to get by with this and is nearly impossible to mess up your finish if you don't know what...

not too crazy about it to be honest

she had her finger on the 911 button the entire time

should be a 15amp fuse, there are a few of those make sure your check those

should be in the interior fuse box kick panel

You must be talking about the plastic "rivets" https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=L33X13209&_sacat=0

Doesn't look totaled to me

a 13" blade might work as they are only 1/2" longer in each direction, if not you might have to downsize to an 11" blade. Trico and Anco both make 11" winter blades.

why do you replace your plugs yearly?

If you haven't already, try jump starting your vehicle, if it starts you will know it is a battery issue.

it is the bulb "type" number. Just google the number and you will find results for both LED versions and incandescent versions of the bulb.

instead of purchasing new ones maybe remove the screws and let them sit in rust remover for awhile and primer and paint them

should be DE3175

I would try fuel injector cleaner and/or a new mafs

might want to try a squirt or two of silicone spray https://www.wd40specialist.com/products/silicone-lubricant/