Search results

  1. rsvinylgraphics

    tail light help

    I was going to suggest a blown tail light fuse but I believe the license plate light and tail lights are on the same fuse. So probably a disconnected wire or wires. Did you look at the bulbs? are the filaments intact?
  2. rsvinylgraphics

    Mazda OEM vs Value brake padsa

    you can find the OEM pads for around $80 shipped on Amazon
  3. rsvinylgraphics

    Codes PO140 and PO171, what are these telling me?

    P0140 could be bad O2 sensor bank 1 sensor 2 which is the sensor after the catalytic converter. A dirty MAFS (mass air flow sensor) could cause the the issue so try cleaning it first before replacing the O2 sensor. P0171 could be many things, the most likely cause being a dirty or faulty...
  4. rsvinylgraphics

    Possible battery issues

    Get the CEL code, you can buy a cheap OBD2 reader or go to Autozone and they will check it for free
  5. rsvinylgraphics

    Power Steering fluid maintenance?

    most places charge around $100-$125 for a power steering flush
  6. rsvinylgraphics

    Not starting even with new battery and starter, seems to have lost TCM communication

    If he/she made the mistake of hooking the cables up backwards on the first attempt to jump the other vehicle it could be the case or also if after attaching the clamps to the cx-5 battery, he/she then accidentally touched the other end of the jumper cable clamps together. Either of those would...
  7. rsvinylgraphics

    Not starting even with new battery and starter, seems to have lost TCM communication

    is it possible you reversed polarity when you jump started the other vehicle
  8. rsvinylgraphics

    Reading Transmission Fluid Temp from OBD Connector

    This is supposed to display transmission temperature but I suggest you contact them to confirm it will on the 2014 cx-5 before purchasing. https://www.aeroforcetech.com/products_order_mazda.html
  9. rsvinylgraphics

    Need help to ID a part

    I could be wrong but it might be the A/C Pressure Switch https://www.tascaparts.com/oem-parts/mazda-pressure-switch-b01a61503?origin=pla&gclid=EAIaIQobChMI-rKI6O3A4QIVmv_jBx3ghwHvEAQYAiABEgIi8_D_BwE
  10. rsvinylgraphics

    P0401

    You could try cleaning the egr valve first
  11. rsvinylgraphics

    Did someone hit me?

    You are really overreacting about that tiny little mark wait until you get your first ding or scratch lol
  12. rsvinylgraphics

    Yellow Wrench

    I would go ahead and do the software update and see if that takes care of the issue.
  13. rsvinylgraphics

    PCV Valve or what?

    can you post a picture of it
  14. rsvinylgraphics

    2013~2016 LF driver's side visor

    Well the most economical way to go is to get a used one from a junkyard or if ebay as brand new ones from the a dealer are around $150 or so.
  15. rsvinylgraphics

    Small emblem sticker on door. 2014 Grand Touring

    That looks like something that may have been installed at a dealer and it is not oem, so you may have a hard time sourcing a replacement. That looks like a "dome" sticker
  16. rsvinylgraphics

    Small emblem sticker on door. 2014 Grand Touring

    I am wondering if it was something that was put on by the previous owner and not a factory emblem. Can you upload a picture of the one on the passenger side? This is how you can upload an image -Settings (located top right corner of screen) -manage files -choose file -upload file -click on...
  17. rsvinylgraphics

    What have you done to your CX-5 today?

    Uploading pics on here is really easy, this is what I do -Settings -manage files -choose file -upload file -click on file name -copy url -click on "insert image" icon -paste url done
  18. rsvinylgraphics

    Need Speedometer Calibrator for Mazda3 Hatch GT

    Getting pulled over for 1 or 2 miles over is crazy
  19. rsvinylgraphics

    Removing old window tint from rear hatchback window without damage to defroster

    Do this with the windows open for ventilation: Put some ammonia in a spray bottle, spray the tint liberally then apply a piece of black plastic or a trash bag cut to size, on top of the wet ammonia. Let it sit a while (at least 30 minutes) SLOWLY pull the tint and trash bag off the glass. After...
Back