Search results

  1. A

    What have you done to your Mazda5 today?

    Awesome! I'd hoped to snap a shot of ours at 200k, but I missed it. So I've made sure my next oil change is due at 222,222km.
  2. IMG_6695.jpg

    IMG_6695.jpg

  3. A

    A Bigger Tire or Lift Kit

    I'm currently running 215/65/16 with an approximate 30mm lift front and rear. Prior to that size, I was running 205/65/16. You'll be rubbing up front with both of those sizes without a lift — I get a slight rub on the well liner under full lock. Rear should be fine as long as you aren't running...
  4. A

    What have you done to your Mazda5 today?

    Here's an illustration I did of what I'd like to do to our 5! Our van is in need of new front struts (200,000km on original struts), so I'm thinking of upgrading the springs at the same time. I did some research and it looks like Mazda Tribute front springs would fit the 5's struts. This would...
  5. mazda5-01.jpg

    mazda5-01.jpg

  6. A

    Putting Steelies on my 5

    I've been running two sets of steelies on our 5 (both are 16").I have a set for the non-winter months with some Mazda pickup center caps (see pic below) and an older set of steelies for winter which I just refinished with some black rocker guard to see if that'll help protect them from salt and...
  7. mazda5-01.jpg

    mazda5-01.jpg

  8. IMG_7193.jpg

    IMG_7193.jpg

  9. A

    Hey Y’all!

    If the tire wear gets to be too much, you may also want to consider some adjustable upper control arms for the rear. They'll allow you to get that rear camber closer to 0. Did this two years ago and have been very pleased with the wear (or lack thereof) in the tread on the rears!
  10. A

    What have you done to your Mazda5 today?

    Finally decided to give the roof rack some much needed love. The basket and crossbars were getting quite rusty, so I sanded everything down and sprayed a few good coats of Rust Check Stone Shield. The plastic fairing was also looking super rough and warped, so I cut one out of wood and threw a...
  11. IMG_8470.jpg

    IMG_8470.jpg

  12. IMG_8469.jpg

    IMG_8469.jpg

  13. IMG_8468.jpg

    IMG_8468.jpg

  14. IMG_8467.jpg

    IMG_8467.jpg

  15. A

    What have you done to your Mazda5 today?

    What have I done to my 5? I Photoshopped it! 😆 Would love to have the endless funds to make this a reality! #ripcvaxles
  16. 2012-Mazda-MAZDA5.jpg

    2012-Mazda-MAZDA5.jpg

  17. A

    Need Stiffer Rear Coils

    Nothing like Mazda's characteristic rust making these jobs a treat! Super interesting that the lowering spring for the CX7 and the 5's stock spring are the same. Really interested to hear your feedback!
  18. A

    Need Stiffer Rear Coils

    Oh I know there's a big hit to the MPG, not just with the lift and bigger tires, but with the rack up there too. It's a compromise we're willing to make at this point. But I would've loved to do a before/after comparison. I'll see if I can sort out what sort of MPG it gets this month and compare...
  19. A

    Need Stiffer Rear Coils

    I can take a couple of pictures of the setup tonight and share them. It's definitely a sturdy setup but the basket (Yakima Loadwarrior) is only rated at 140lbs max capacity, so I wouldn't risk putting any more than that up there for a long period of time. I have stood on it (I'm 180lbs) and...
  20. A

    Need Stiffer Rear Coils

    Looking forward to seeing the results! Let me know if you do the fronts as well — I'm curious to see if the CX7's springs will fit the Mazda5's struts. For the roof rack, I purchased a couple lengths of aluminum t-slot track (see image below) and mounted it to the roof moulding. I also used the...
Back