Search results

ok thanks

Hi, The problem is that after taking apart everything to get to the manifold to take it off ,I ended up not removing it so put everything back together for some reason the car doesn't idle properly and dies ,any ideas where to start should I scan with OB11 scanner ,would that show anything...

you cant trace the hoses to where they go

tried to see but cant seem to find the info in my online manual,not sure where to look, sorry

is that a mazda 6 in the background

maybe I can ask a question about the rubber piston ring is there a right way and wrong way to install it ,is there an inside and outside way of installing it ???? Also is there a good lubricant I can use all the ones I have tried seem to gum up on me ,not sure if its the lube or if its getting...

I took my brake apart ,it was stuck became super hot, hope didn't warp something, but suspect piston ring problem ,not sure if rust or bad seal.Would like the manual if possible. Thanks Alex P.S. Hope you are well, see your name everywhere here.

Thanks,mine has the gear indicator so it's the sportstronic

I'm pretty ute it's the sporstronic you can also use it in manual mode,just slide the shifter and you arable to manually shift,hope that helps

thanks ,the only problem now is that its slow to go into reverse ,takes a few seconds to engage ,anyone know the problem,also when in park the car will rollif on a very slight incline

well got the pan back on,just waiting for silicone to dry ,just to make everyone aware the trans pan has a donut looking magnet inside to catch any metal filings that may happen inside the tranny.

Thanks Mr giggles, I'll try that

I would say its the dipstick hole is where to replace oil, the fluid looks brown dirty ,but while it was draining from under car it looked red in the light cant remember if it smelled bad which might be a good thing,didnt smell burnt to my knowledge.

certainly dont want to mess the trans up,half of my fluid went on ground and some drained out of the rusty pan hole,so maybe have a quart left. from what i have seen the hole is on top of trans to refill is that correct

thanks guys ,hi Paul, so there is a dipstick sheees never saw that i can remember ,will have to look,well my trans pan has a hole in it car has been leaking not sure how long but it has been slipping guess thats the reason.Just a question can i drive it without the pan on the trans to drain...

Hi Folks, Anyone know how much fluid the transmission holds ,I have taken off the pan ,will i need to put in the maximum amount that it holds,also should I replace the filter while the pan is off and is it easy to fill the transmission.How do I measure the amount thats in the...

well this job will be delayed until the new year,have installed the calipers on car just need to bleed its been very cold here and will be away for some time during holidays, thanks to all.HAPPY HOLIDAYS TO ALL AND FAMILIES

well haven't been able to make much headway ,have one brake plugged ,threaded the other one just need a 9x 1.25 bolt to fill the hole so have to find a bolt , but its an odd size so have to find a place that sells it .Home hardware doesn't carry it.Maybe home depot. { PS} Thanks...

Thats a lovely display of the internals(scratch) ,looks complicated ,my question is when I bleed the brakes does the fluid just push the piston out to the pads or is there some other kind of adjustment that is required ,if anyone can give me the link to the manual for the brakes that would be...

have a question about the pistons they screw on which is different that other cars i had.Any thing i need to know about them