Search results

my bad, long day. stolen from http://www.flyinmiata.com/protege/tech/ecu_theory.asp ECUs have two basic modes: open loop and closed loop operation. Closed loop means that the ECU looks at inputs such as the front O2 sensor and adjusts the fuel for the ideal stoichiometric ratio for maximum...

they are selling the same thing - recalibrated autometer led style gauges. i hadnt run accross or heard of gadgetseller.com before. if someone can give me the voltages we are running at wot and idle so i can make sure the gauge is in the correct range i will order one. ive been wanting the...

http://shop.store.yahoo.com/machv/cybairgaug.html has autometer a/f gauges recalibrated to read .76 to .96 volts instead of .05 to 1.0 volts. they claim it will stay dark until the car is at high / wot and then it should read out (when you really need it). can someone tell me what voltage the...

i dynomated the rear deck under the trim and put foam weatherstripping (the kind you use around the doors in the house) between the trim and the deck area. took care of almost all of those rattles. i can hear my 2 jl's over the rattles now. still have the bowling ball clunk back there though :)

those are 2" guages. will they mount correctly in the 2 1/16" holes in the a piller pod?

i think its the other way around. 1 hkpa is abouut 14.5 psi. that would make it correct - .47 x 14.5 = 6.815 psi

they are extreme imports in springfield, mo. i think them used tbmsped's car as a prototype and are selling them elsewhere now.

yellospeed - me too when i pulled mine the first time, i managed to pull the nf rca cord loose from the circuit board. fortunately, it just needed plugged back in after opening the case on the radio

neutral safety on orangemsp's car orangemsp, how did you wire the neutral safety switch wire? dont want the msp leaving without me :)

shock sensor mounted to wiring harness code alarm recomends mounting the shock sensor by attatching it to a wiring harness with a couple zip ties, or velcro to anything under the dash. there is a warning in the install manuals not to firmly mount the sensor to the column, firewall, or floorpan...

rostra cc I had the rostra cc put on my msp. they have a battery powered switch that clips on the side of the steering wheel. Actuator is rostra #250-1223, switch is #250-1588. I had a local shop install it for me so i don't know about the install, but it works just as well as any factory...

the link to the howto isnt working. i didnt find anything in the search. is it really as simple as putting in the 2003 mpv stalk?