Search results

Sigh.

It might be interesting to know that the affected VIN's are specified: JMZ KFGWMA ** 624741-751439. It concerns vehicles manufactured from june, 20, 2017 to may, 29, 2018. As per RB R034/18A. These vehicles should be updated via the Mazda Diagnostics Module (M-MDS); this FW update of the...

PCM firmware should be 110.05 or above.

Are you sure that in the KSA this info is available from the radio station? (ex-KSA worker, radio station HZ1RU)

Thanks Anchorman. Good to know this problem gets solved.

Thank you Sir!

Same here.

No such issue has been reported on the several European forums neither.

The new owner of your existing car can create a new user account; the MZD server will recognize the existing car (thru it's VIN) and update as normal. The same goes for your new car : regardless of the login (address/password) your new card will be recognized as a new car and update as usual (3...

My new CX-5 is barely older than yours and never exhibited the problem that you described. Cylinder Deactivation seems to work very well, despites what yrwei52 says.

Here you'll find everything you need :http://www.cx5-forum.de/f11/schaden-nockenwelle-folgeschaden-turbolader-etc-2715.html

Tried your solution however to no avail. It is very difficult to diagnose, rattle is not always there*.. However found out that the rattle comes from the upper steering-column cover; putting a hand on it stops the rattling noise. Will disassemble and add pieces of double-sided tape.

Thank you Felix!

Thank you for your suggestion! I will try that and advise.

My new CX-5 exhibits, after a couple of months driving, a rattle apparently coming out of the HUD assembly. Anyone with the same problem? If so, how was it cured? Eventually, how to remove and reinstall the HUD-assy? Thank you.

Mazdadude, that is correct!

Bought them here : https://de.aliexpress.com/item/F-r-2017-2018-mazda-cx-5-cx5-KF-refit-vorderen-haube-motorabdeckung-hydraulikstange-Strut-federd/32849331433.html And yes, I used two struts. See attach on "how to install".

I installed them this weekend. Very pleased.

Thank you Sir! Your reply much appreciated.