Search results

  1. E

    2011 CX-9 Sealed Transmission Service

    Thanks Charles. Your write up there was pretty helpful. I don't see anyone anywhere discussing changing the filter or using the flush method. Guess I'll just do a drain and fill and maybe a subsequent one soon after depending on how burnt the tranny fluid looks.
  2. E

    2011 CX-9 Sealed Transmission Service

    Hello all, I've purchased a used 2011 CX-9 a few months ago with just over 100k. I couldn't find any record of the transmission being serviced and park-to-drive isn't as smooth as I think it should be. I'd like to go ahead and service the tranny as I typically do for all my other cars. That...
  3. E

    Mazdaspeed6 compressor not clicking on after new compressor clutch kit

    update: I checked continuity from the clutch actuator connector back to the relay and the connection is good. With the car running and AC on I just jumpered 12V to the relay socket (AC clutch side) and bingo! cold AC. However, when bypassing the relay, shorting the NC and COM connections on the...
  4. E

    Mazdaspeed6 compressor not clicking on after new compressor clutch kit

    The compressor clutch in my MS6 went bad. The bearing was shot and something caused the actuator coil to basically melt. I finally got the new clutch kit installed (new actuator, clutch, pulley wheel, and bearing). Now that I've replaced everything I would expect the compressor to click right on...
  5. E

    Mazdaspeed 6 Rear Bumper

    Looking for a Mazdaspeed 6 bumper in good shape. Black preferred. Either bumper skin alone or with plastic exhaust trim even better. PM me. Thanks!