Mazda 2/Demio Performance charts

[AN7]

@XCLR8T

1.3L or 1.5?

 

[XCLR8TN]

@XCLR8T

1.3L or 1.5?

sorry should have specified, US Spec 1.5L

 

[AN7]

sorry should have specified, US Spec 1.5L

Does anyone know what is the advance that the US spec model have between 6000rpm to the limiter?

 

[shaowq]

iunno if i can really believe that the 2 has a meager 5% drivetrain loss...i think your graph numbers are a little bit more believable as far as Corrected WHP with about 84 whp stock and 87-89whp with your new muffler

 

[shaowq]

stock 2 has about 16% driveline loss on our dyno

which would make her graphs completely believable and the written in numbers very skewed per my original conclusion. 95.5 whp i knew was way too high to be a stock dyno

 

[Phone]

Did 2 pulls today

Run 1: 81.45 HP, 84.62 Ft-Lbs, 58.4*F
Run 2: 93.77 HP, 97.31 Ft-Lbs, 61.0*F

Nothing changed on the car or dyno between runs; maybe the way the dude staged the car on the drum. Was on a Dynojet.

 

[shaowq]

from the looks of it, you might have had a pull in 3rd gear then a lower or higher gear maybe

 

[iceman]

 

[iceman]

Stock mazda 2 de 1.5 from Switzerland 50k kilometers on dash.

 

[ziddey]

why is your crossover at 4000rpm?

 

[iceman]

It was more than likely a setting such as forced scaling that was input. Nothing to worrie about just a display setting.