(Located in GA) Metallic36's 2003.5 Titanium MSP - Runs Great & Built!

OFFERING FOR SALE..

Everything is complete on my car, no issues, no fuel cut.The rear bumper has a scrape on one side that has been touched up with OEM paint, there are a couple small dings but nothing major. Mechanically it runs great, idles nicely, a/f ratios are always great, and when you ask for boost, it gives it to you!!

NEW A/C BLOWER MOTOR RESISTOR INSTALLED on July 17th, and A/C Professionally Recharged on the 13th.

I have a folder containing the invoices for the maintenance/repairs that have been completed for this car. It has a new water pump and thermostat also. It was last at Japanese Motor Works in Athens, GA, where they fixed the remaining issues, and they were awesome!

This car needs absolutely nothing mechanically but to be driven! Production # 449. VIN: JM1BJ227130647068

PRICE: $10,900 OBO. Comes with it's car cover, and several misc. goodies that have not yet been installed :)

Rebuilt engine - .20 overbore, CP pistons, K1 rods, has 8.5:1 compression ratio. New engine has approx. 2500 miles on it. Chassis has 83,611 miles.

Rebuilt transmission - replaced internals with new OEM, still under 1-yr warranty. Has about 1500 miles on it. Welded LSD. Redline MT-90. Has lightened flywheel, Stage 1 clutch. (Could use the Stage 3+ clutch if you're wanting to get the most out of it)

New cylinder head - new valves, etc. Has approx 500 miles on it.

New PPG windshield installed on 6/22/09


Recent mods added within the last 1000 miles:

Corksport Radiator
Weapon R Coolant Tank
AWR 90 dur Front/Rear Motor Mounts (I have 60 dur inserts also)
GHL Turboback Exhaust (3" w/ high-flow cat)
New spark plugs
1.8L wires/coils conversion
440cc Fuel Injectors
GT28RS turbo
Vibrant Vacuum Block
MAM tubular exhaust manifold
Modified wga, good for 18 psi
Altered Customs FMIC Kit w/ Relocated MAF
Carbon Fiber Velocity Stack 3" Short Ram Intake
TurboXS RFL BOV
Kartboy Short Shifter
Corksport Bronzoil Bushings

SplitSecond AFC V2 (has connectors that allow you to easily
switch back to stock ECU for emission purposes if needed)
AEM UEGO Wideband
Greddy Profec B Spec II EBC
ForceFed Steering Column Gauge Pod

Brand New tires on the front, rear tires have 500 miles
Protege MP3 OEM Rims
Xcelerated Concepts ZX2 Carbon Fiber Hood
NRG Carbon Fiber Hood Props
Depo Headlights with Black Housing
Black Rhino-covered Diamond Plate Floor Mats

:D
 

Attachments

  • 100_4253.webp
    100_4253.webp
    335.3 KB · Views: 536
  • 100_4173.webp
    100_4173.webp
    184.1 KB · Views: 538
  • 100_4260.webp
    100_4260.webp
    167.2 KB · Views: 527
  • 100_4267.webp
    100_4267.webp
    406.4 KB · Views: 494
  • 100_4261.webp
    100_4261.webp
    368.5 KB · Views: 392
Last edited:
As I said previously, I am NOT TAKING ANY OFFERS for what is on my car until my car is sold. As also stated, the MAM mani is staying on the car. I am working only on getting my car sold right now, not trying to figure out who wants what. Sorry to be a b****, but geez, thought I already made it plain enough above.

how bout a trade for stock mani and some $ for your MAM mani.
I thought the US postal service had to deliver the mail rain,sleet, snow or mud?? That sounds like federal issue now!!!
 
I thought is was cause you didn't want to souce a stock mani, good luck with the sale
 
Thanks, I just said I didn't want to take off anything that would be a hassle.. the Mani is one of them.

(MAM mani, turbo, short shifter, motor mounts, and anything else that will be a hassle for me to take off..)
 
Last edited:
Another bump.. can do payments, had one person but that fell through, so here we go again.. I can do $2500 down, $400 a month. Preferably, the buyer can do payments until they can get a loan from the bank. By doing payments with me, there wouldn't be any interest, and it would allow the balance to decrease every month and easier to get a bank loan on the balance since it would be lower than the purchase price obviously. Just a thought!
 
Any interest? Willing to give someone a GREAT deal on this car, I just need to get down to one vehicle now.
 
Another Bump, A/C works great now, recently got it recharged and replaced the blower motor resistor. Great car with no issues!!
 
So Jen, I've been waiting patiently for the road update... any progress towards an acceptable resolution?
 
Oh, yes!! It is getting paved, the city and county finally got together and decided to get it done. The developer was tracked down to sign a quit claim, and then the city took over the roads. They're going to put in drains, etc. and they have been keeping it maintained well while they have been working on the road. It's supposed to be done in a month or two.
 
That's AWESOME!!!!(2thumbs)

I'm really glad its working out for you. See??? Good things happen to good people!
 
Will be installing the SU Intake Mani and Spec Stage 2+ clutch soon :D
 

Attachments

  • 100_4518.webp
    100_4518.webp
    323 KB · Views: 150
  • 100_4519.webp
    100_4519.webp
    285.2 KB · Views: 155
  • IMG_0263.webp
    IMG_0263.webp
    201 KB · Views: 147
Last edited:
I'd sure like a report on the clutch... kind of a goldilocks and three bears deal; not enough, too much, or just right.(yupnope)
 
Bumpin' up again.. thinking of selling it without a few of the mods (basically if it were stock again minus the built engine) at a lower price if there is interest... I now hate EGR tubes and I have more tools now than I ever thought I would need from Lowes.
 
Back