a good grounding location?

[maxchao]

OK I searched but surprisingly I found nothing, or maybe my search skill needs to improve.
But yes my question is simply that where is a good grounding location for P5? And how to make a grounding point? I was told to use just a nut and a bolt??

Thanks

Josh

 

[808MP5]

Use an existing hole that has a bolt already in it. scratch the paint off from under the bolt till you see bare metal on the frame.

ground all your amps and capacitors to the same spot. and keep your ground wires as short as possible.

ran all my amps ground to the capacitor and then grounded the capacitor to a single location.


see the little yellow circle that's where i grounded my cables

 

[maxchao]

OK, is that the backseats? Can't figure out the angle you took the pic.
I will try to find a spot in the cargo area later today.

Josh

 

[maxchao]

OK, is this a ok location? This is the back of the passenger side rear seat, it seems like there is no paint on the bolt so do i just unscrew it, wrap the ground wire around the bolt and tighten it?

Josh