I've searched every thread that has to do with foglights, but it seems no one really has done the install using factory wiring. I bought the switch and the front harness that goes to the plug behind the winshield washer resevoir. But my foglights still don't come on. Do I need a certain relay and how would I wire that relay. I looked at all the wiring after the switch and there is no where to plug in a factory relay or anything so i guess I would have to splice it in. But to what wires would I splice? Any help would be greatly appreciated.
03.5 MSps with p5 foglights
- Thread starter MOnk
- Start date
- :
- '13 CWP MS3 & '16 Mazda6 GT
I believe the fogs from the p5 are to big to fit the 03.5 MSP
- :
- '13 CWP MS3 & '16 Mazda6 GT
n/m you have wiring ?'s not fitment ?'s LOL my bad....
- :
- Das Pretzelwagon
Stupid question: do you have a fog switch?
RallyeRedSi
Member
- :
- 2008 Civic Si
yeah do you have one, i have p5 foglight on my car ask never sober cause he did it on mine i forgot what he did
titanium speed
Member
- :
- 2003.5 mazdaspeed protege
if i were u i would leave the lights out. better air flow
Turtle of Time
Resident MassageTherapist
- :
- '08 Mazdaspeed 3
where did you get the relay? is it the one by the security box?
Turtle of Time
Resident MassageTherapist
- :
- '08 Mazdaspeed 3
anyone?
- :
- 2003.5 Mazdaspeed Protege
MOnk said:
Can you share the part numbers?
I was looking to do the same for my 2003.5 MSP.
MazdaSpeedSter
Member
- :
- Laser Blue MSP #2733_sold
I just did it... (thumb)
MazdaSpeedSter
Member
- :
- Laser Blue MSP #2733_sold
MazdaSpeedSter
Member
- :
- Laser Blue MSP #2733_sold
onequickmsp
Member
- :
- 03.5 Mazdaspeed Protege
NO!!! I have gone through this headache. I bought PIAA 540 because I was told they would fit the lip and they DON"T FIT. I tried the P5 fogs but they are too large and don't fit. I had to go through some trouble and exchange the 540 for the 510. I now have 510 but I don't like the way they look so I'm not going to bother putting them in. Once agian, P5 fogs WILL NOT fit the 03.5 lip, nor will the PIAA 540. The only fogs that fit the 03.5 lip are the PIAA 510 to my knowledge. I think I'm going to end up cutting behind the plastic grille on the air dam and place the fogs behind the plastic grille so it still looks clean during the day and lights up at night. Wish me luck, I don't look forward to cutting. Good luck with your project.Mutmatt said:
