Recent content by squarelogo

Cheese, you nailed it. You saved the day, Thank you SO much. Fuse replaced, good to go.

Thanks for the replies. No CEL. Any ideas as to which fuses to check? I'm hoping I didn't fry the ECM. Thanks again.

Hello there, I just changed the plugs on my wife's P5. After getting it all put back together I went to start it up... nothing. It turns over, but won't start. I went back under the hood and looked around. At first, I couldn't find any problems, so I decided to reinstall the old plugs. I got...

Thanks to everyone for the advice! I'll give it another go with a BFH.

Here's the other things that have been throwing me off. • I originally tried to order the rotors online and the merchant asked me to measure the rotors to let him know which ones to send. He claimed that there were two different rotors used on p5's. I thought that seemed screwy so I canceled...

I've done this many times before, just not on this car and I've never had a rotor that was this hard to remove.

If that is the case, these things are truly fused together. I couldn't find a seam.

Thanks Keno, I found it hard to believe that the nut needed to come off, but it looked like it was all one piece and after I took some swings at the rotor and it didn't move I figured it was connected. The raised black lip on the rotor around the hub in my picture is not on the replacement...

Hello all, Replacing pads and rotors on a 2002 P5. I bought some rotors from the auto parts store and when I popped off the wheels to replace them, they were slightly different. The rotors on the car are the factory OEM rotors and have an extra lip around the hub. It also appears that I have...