Recent content by Rotorzilla

yeah looks like the parts zip is broken. does anyone else have a copy?

I was unable to repair the stud, so over the next couple months I will be be doing a full rebuild. I have a set of FD housings I will use that have new studs. with using the FD housings it will have the larger exhaust ports.

I like how you mounted the coils. do you have any more pictures? I mounted mine on top the rotor housings, and looking back I wish would have mounted them someplace else. I think while my engine is going to be out of the car I will relocate them.

looks like it is coming along. keep up the great updates.

you might get a response if you posted some pictures with more details on what type of rotary engine and what type of transmission it is.

yeah any good dino oil is ok. stay away from synthetic oils.

Does anyone know what size the stock Cosmo oil cooler fitting size is? I want to add an additional oil cooler. I'm going to be building the cross line using -10 AN hose and need to get a AN fitting to fit the stock cooler.

I wounder if you can put 4.1 from a FD into a Comso. That would give a little better on the highway but not much more different in the other gears

I converted my Cosmo to 5 speed using a FC trans 1st 3.48 2nd 2.02 3rd 1.39 4th 1.00 5th 0.72 tire size 18 255 40 using the calc on this page I set rpm to 7500 http://www.boosttown.com/gearbox_differential/speed_calculator.php road speed @ 7500 rear ratio 4.3 ( 13b cosmo) 1st Gear = 62.43...

Going to start posting the progress of my project Cosmo. I was on Yahoo Auctions and noticed that a 92 Cosmo that was ending later that night. So I just placed a bid on it thinking some one else would out bid me, I already had 1 Cosmo and FC and was not really looking for a project car at...

your new body kit parts look amazing.

snapped exhaust stud in the housing. After I converted my Cosmo from 13B to 20B I was tighting up the turbo manifold nut and it just snapped. I drove it around for a couple weeks until I had the time to pull the engine out and try and fix it exhaust stud and LIM leak Ok pulled the trans...

frank20bcosmo which box under the dash is it? Do you have picture of your box? When I converted my Cosmo 13B AT to 20B 5 speed. to get back up lights all I had to do was this if you need the wiring manuals I have them here http://rotorzilla.com/files/

This past weekend after making a couple tuning runs, I got a massive intake leak. my idle was up to 1800 and the car would buck like crazy when I would try to drive. lucky I had the laptop with me I was able to tune the fuel map around leak so I could drive it home. so I built a leak tester...

My car is converted to 5 speed, using a FC transmission.