Recent content by Rileysowner

  1. R

    Removing Drums

    Grrrr. The stupid screws holding the rear drums on won't come loose. I got them off when I did the brakes a few years back in spite of rust, but this time, they are stuck solid. I have tried penetrating oil and a manual impact driver, but with no success. I even accidentally stripped the...
  2. R

    '98 Protege SE 1.5L getting a P0141 on scanner

    Yup. It is great when things come together. Now to finish fixing the exhaust leak a little further back. Then some body work. Oh, and before all that an oil change.
  3. R

    '98 Protege SE 1.5L getting a P0141 on scanner

    Ok, got her done. Gave it a good long drive to really heat the exhaust (and pick up a 7/8" socket. Put the 7/8" socket on my breaker bar, and a good hard tug, off she came. The only annoying thing was the NKG O2 sensor came with instructions that were for two different types of O2 sensors...
  4. R

    '98 Protege SE 1.5L getting a P0141 on scanner

    Ok. You are correct, the exhaust was cold. I will have to take it for a ride and see if that helps.
  5. R

    '98 Protege SE 1.5L getting a P0141 on scanner

    So, the sensor seems stuck fast. I worked at getting it out for almost an hour and could not get it to budge. Any suggestions on how to get it to move as I would like to get a new one on before we head out on vacation so I don't have that task waiting for me when I get home.
  6. R

    '98 Protege SE 1.5L getting a P0141 on scanner

    So I noticed. I can't imagine how much would have to come out to even access it. I got the sensor yesterday, and hope to install it later today.
  7. R

    '98 Protege SE 1.5L getting a P0141 on scanner

    Thanks for the help, I did find the first O2 sensor. I didn't know the Protege had a cat up in front of the engine (insert shocked smiley). I thought the second O2 sensor was the 1st O2 sensor. I was dealing with an exhaust leak yesterday, but have started to price out O2 sensors. Wow! They...
  8. R

    '98 Protege SE 1.5L getting a P0141 on scanner

    I cleared the code already and it pops up again after 10-15 minutes of driving. Could be a wire, but I will have a look when I get under there this morning. Thanks.
  9. R

    '98 Protege SE 1.5L getting a P0141 on scanner

    We have been getting a check engine light for a while. I finally got around to purchasing a scanner and found it throwing a P0141 code -- O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 2). Reading that makes me think that there are 2 O2 sensors, one before and one after the cat. However...
Back