Recent content by phrozen

Cool. Sounds good! Thanks for posting your review.

Yes, but typically the syncros are the part of the transmission that are more fragile. Those were the majority of the transmission failures we were seeing on the SRT-4 that caused us to come up with the WOT Box. Of course, you will need a strong clutch to no-lift shift if you want to get the...

It doesn't matter if you have a cable throttle or drive by wire. You go to WOT and the WOT Box cuts spark to some of the cylinders to hold the RPM you have programmed. This way the throttle is completely open and you can spool up the turbo before launching. The same thing with the no-lift...

The point of the no-lift shift is that it makes it easier to shift and reduces the chance of transmission damage. If you drive a car with a WOT Box you will see what we mean. The no-lift shifts are effortless, as if you are shifting the car with the engine off. This drastically reduces the load...

Posted! http://www.mazdas247.com/forum/showthread.php?t=123726096

It can be used with an autotrans. We are working on that now with the Mustang guys. I am adding a 3-step launch control for the automatic turbo cars.

Ha! WOT Shift over that rock!

Sure, why not? It will work on just about anything. You just need the following: - TPS or APP sensor (everybody has one) - Clutch "upstop" or cruise control switch (most cars have this, but if you don't, you can add it) - Some kind of RPM signal, either from coil on plug ignition or fuel injectors.

Will do. That makes sense because we are going to offer the WOT Box for basically all the Mazdas, not just the MSP. We already have detailed installation instructions for the Mazda6, Mazdaspeed 3 and Mazda Speed 6. We have also done a test installation on the 2nd gen Mazda 3, and are just...

Directions are posted here: http://www.n2mb.com/wotbox_instructions_mazdaspeed_prote.pdf Take a look!

Got a response. Thanks.

Everything is programmable: http://www.npcompleteperformance.com/wotboxusersguide That is what you can program right now. In the new software release I am working on, there will be even more options... These new options you will set from a new Windows interface software that is in development.

Just waitin for Antoine... hellooooooo Antoine....

Yes. When we test out a new car we make sure both features work before announcing availability.

If you have ever installed any wiring mod, you should be able to do this. It is just a matter of hooking up 5 wires. As an example, here is the installation guide for the Mazda 6: http://www.npcompleteperformance.com/wotbox_instructions_mazda6.pdf We are putting together a guide similar to...