Recent content by petesamprs

My gripe is with the overhead accent light that stays on at all times - too bright at night! At least the map/door light you only use rarely when you need it. For the time being I covered the accent light with a small piece of electrical tape.

Any update here?

no sorry I didn't check the other two. Once i found the switched hot I was done. But it should be easy if you know the ground...put one pin into the ground and then just try the other two one by one to see which is constant hot.

Finally got some time today to install dashcam. Did some work with the multimeter to figure out wiring on the frameless mirror. First had to identify which pin was ground by running a wire to ground nut under the hood and testing for continuity. Then once I had that, tested other pins for 24v...

Here's the connector coming off the mirror for the frameless mirror. it's 10 pin: Top 5 (left to right): Black, empty, empty, Teel, Black Bottom 5 (left to right): Blue, Purple, empty, empty, Brown See pics attached. Any ideas which is ground and which has switched power. I have a...

anyone have wiring diagram for the 2019 frameless mirror connector? I'm looking for switched power for my dashcam (don't need constant on).

It's one of those things that once you have it, you can't live without it. I have it on my BMW 5-series (F10)...has caught a few slow leaks well in advance (easy to see how many tenths of PSI you lose each day), and very helpful during seasonal weather changes to make sure pressures remain...

Looks like this is the solution referenced above: https://www.amazon.com/dp/B077RVS8LB/?tag=m20b7-20 A little pricey, but simple plug and play with existing TMPS sensors. Just need to find a discrete but accessible location to mount it. I'm thinking to the left of the steering column, which...