Recent content by ozzie

i have the toyo tampion gu's in 205/45/16 and they are great the i have only had them slide out once and i was goin around a round about in second gear with my foot flat to the floor and it was only starting to slip then it was dry it also handles in the wet quite well i like the toyo brand i...

i know that you want a budget kit but make sure that the get the right kit. i dont know what engine you have but the 2.0ltr and the 1.8ltr which is the FS engine share the same block just different bore and stroke but the 1.6ltr which is the zm engine like i have is a different block so the kits...

i asked the guys at the tire shop when they put on my toyo 205/45/16 and the told me to run 36lbs because of the lower than stock profile it is becaause you have less tire wall between you and the road to prevent chip this is also why your ride is rougher.

if you go to the how to page you might find a how to guide to help you do it. also check i think one of the modle over sees may be japan im not sure http://mazda3online.com/ this web site also has lots of part for our cars but its an american site like all the site for our cars i know they...

Hi guys im interested in entering a AutoX event and have no idea how to find one in my area could any one tell me where to start looking or if they know of an event that runs in the perth area

hi it may have been covered i do not have time to read the wholethread at this moment but i have black a 02 p5 and am in the process of color coding my interior black and red and i wish to carry it through to the exterior so i was thinking of using the eibach sportlines because it give me a nice...

cheers that should give me enough info to make me handle like a train

thanks kpabap that was just what i whanted to know is there any thing else that you can do such as strut brace would that make a differance and i know some cars have front sway bars is it the same in the p5 and what about kamber kits to they help handleing

hi guys i want to make my p5 handle before i make it perform at the moment it pretty stock i have got a set of 16" roh adrenalin with 16/205/45 toyo's on but with the stock ride hieght it looks like an outback with 1.5" of rubber and 2.5" gap to the gaurds so i want to lower it i as told i...

hi guys im a real estate agent in the perth area i can offer 10% off the sales fee or just give you any advice but remember laws differ from state to state but happy to help im also a mechanical fitter by trade and can just give a hand (monkey2)

hi guy i do have the ambition to turbo my 02p5 and i have also been reading the n/a tech forum about the mods that they perform and i was hoping to do my cams and my ecu plus exhaust i under stand that there is no need to waste money on my headers because i will need a new one but i thing...

i just put the other hose on it just to keep any unwanted dirt and grim out

thank you so much i had no idea it was capble of that i was thinking about 7 to 10 psi max not that much

who many lbs can you run safely in stock 1.6l zm motor does it meen that you are running 20lb into a stock fs motor, no forged rods of piston or additional bolts in the big end baering. will hiboost just supply the plumbing (no turbo or haultec) if so how much

free: tb coolant bypass i bought the fitting and then noticed that on my 1.6l zm motor that one cooland line was longer than the other one and the lines both came from near each other i use the shorter one first and it had a small kink in so i changed it to the longer one and it fit with no...