Recent content by ncarrick783

The code readout from AutoZone says P1450 EVAP Control System (Excessive Vacuum). I've checked the gas cap and it seems ok. Nothing obviously broken or damaged around the charcoal canister, canister drain cut valve, hoses, etc. Here's the wrinkle. The CEL goes off when there's a full tank of...

2000 Protege LX 1.6L automatic with 261,300. Runs pretty well, although it burns (and leaks) oil and I'm afraid the control rings or valve seals are going bad/gone. Still, it passed emissions earlier this month. So I've got that going for me. Starts no problem, but had to have a new starter...

I was afraid of that.

I've got a noise coming from the drive belt area that I would describe as sort of a hollow, metallic gurgle. It increases when throttle is applied, but you can still hear it while idling when the hood is open. It's mostly noticeable at lower speeds, although this could be due to ambient...

Thanks. I've read that using a higher viscosity oil might help some. I'll probably try that, and a new PCV valve.

I've got 2000 Protege LX 1.6L with basically no aftermarket parts. In the past year it's started burning oil pretty fast, and I've noticed there is a black, oily buildup that accumulates on the rear bumper and rear trunk panel after a few days of driving. There's no visible smoke from the...