Recent content by EnjoyMinuteMaid

PM sent.

I'm in the Laurel/Beltsville area and I just picked up AWR F&R mounts, side inserts, and stock replacement j-pipe for my 03.5 MSP but have no tools nor a place to install them. Does anyone have any referrals for a shop/garage? Anyone willing to do a joint install? I'll pay.

has anybody figured out how to fix the side to side play in the shifter? It has nothing to do with how tight the nuts are at the bottom of the shifter, it has to do with one of the two linkage rods, and its not the one where kartboy or twm shifter bushings go. there is a rubber piece that I...

brand new TWM, its so much better, much less play and goes into gear with a much more solid feel. It's shorter, looks better from inside the car, and simply feels like a higher quality shift. The one thing that other people might not like is that it is a little bit harder to shift, but with a...

Hello everyone, I have done the unthinkable, the unimaginable...yes, I have removed the B&M shortshifter. Thanks to the recommendations of a number of members on the forum, I decided to actually put the jack under the shifter and jack it out of the housing. It required some pulling from the top...

so that breaks the stud and then they just slide out?

well how hard is it to pull the studs and how much does it cost to buy allen head bolts?

it shouldn't be hard at all, try pm'ing JDMSam or Velocifero, and ask about rerouting the O2 sensor so you don't have to extend it

oh the s+j pipes are great, its the rest of the exhaust thats miserable (in my opinion). If you want the best you can buy at this point, get the vibrant exhaust . Unfortunately it will replace the j pipe you already have (but thats not the expensive part anyway). You can also look into the...

I wouldn't get the corksport exhaust either. Instead, I would look into getting the midpipe from ProtegeGarage (w/ or w/out the high flow cat) and getting whatever catback exhaust you want. The corksport metal is very thin and has problems with cracking. It is not simply solved with stiffer...

I have the newest one (6-1), pm Kooldino and ask him about two man street tuning, I have never done anything with tuning in my life nor the mpi tuner and we tuned his car slightly together over the weekend. He'll help you

which is why I said you should try it with a friend in the car(enguard)

why does street tuning not work? If you have a friend in the car, it isn't hard

Does anyone know how to remove the B&M shifter? Has anyone? I cannot pull it out of the shifter housing, any ideas?

So does anyone know how to or has anyone removed the B&M?