Recent content by drkness2003

  1. D

    MSP helpp!!

    Still having problems Hey so im still having the problem with the bogging and the low vacuum at -6 and now i am having a new problem, my car will not go into gear after driving it for a little while.. ill stop get out for a little then go and try to start the car and put it into gear and...
  2. D

    MSP helpp!!

    bumppp thanks for all the help guys/girls... so i rele think that its the wastegate so i orderd a new forge one should be in in a few days! it does feel like a fuel cut and i was also running a code for to lean and also some weird p0660 code that is for the vcis/vics or something.. its for the...
  3. D

    MSP helpp!!

    bump ok so now i have done a little work on the car i have changed the plugs, ignition coils, wires, and changed most of the vacuum lines! and the vacuum is still at -6. so i was thinking maybe it was the wastegate, so i pintched off the vacumm line that runs to the wastegate and when the line...
  4. D

    MSP helpp!!

    bumpoo thanks for all the advice... i had a miss type i ment to say that when i plug the wastegate line the vacuum goes from -6 to -20... and -20 is normal... yeah im going to order the wastegate tmrw hopefully that fix's the prob cause all i have had is probs with this car so far!! :( ... ok...
  5. D

    MSP helpp!!

    bumpooo No i did not get a warrenty with the sale, that s*** would be on there door step if i did haha, i think i figured out that problum tho... wastegate... when i was checking the vacuum lines i figured i would check the wastegate.. a wastegate should be totaly closed when at idle and when i...
  6. D

    MSP helpp!!

    bump hey... so i checked all my vacuum lines my plugs and everything seems to be in good shape... only thing that i can think of is that the idle screw on the tb is soundling like its leaking? is that a normal thing? its very slight... i would check my wastegate but i have no idea how to do...
  7. D

    MSP helpp!!

    Neww update Ok so new issue.... I'm driving at 78mph in fifth barley on the gas and my boost if flucuating from +1 to -3 speraticly... WTF is going on any ideas? Thanks
  8. D

    MSP helpp!!

    Bumpo Hey thanks for the ideas! I'm going to change the coils sparks and wires today but it seems that I deff have a leak somewhere so I'm going to get so carb cleaner and see if there are any open leaks... Just another symtome I have is all the vacuum lines are rock soild idk if that's normal...
  9. D

    MSP helpp!!

    more info update!!! hey so i decided to pick up a boost gauge to see if there was any leak or anything... so i hooked it up and saw that when at idle its at -6 or -7... shouldnt it be like -18 -20? and when i get on it it boost almost to 10psi? this car is a mistery to me hahah ALLLLLL and ANY...
  10. D

    MSP helpp!!

    Bump Well the strange thing is that the gauge never reads to hot it never over heats it's just sometimes bubbles into the resv. And in the upper hose it's very odd... The only other thing I can think of is the car had a intake cone right before the maf maybe it's reading way to much air cause...
  11. D

    MSP helpp!!

    ok, so i just picked up a 2003 mazdaspeed protege... i drove 4 hours to pick up the car and drove it home with no probs... i got the car home and the next day i was driving to work and it started to hezitate and eventually stall out... i got it into a gas station and tryed starting it and...
Back