Recent content by ameflyer77

  1. A

    Blown 2.3 Engine

    Hey josh, The speed 3 swap would be a lot more trouble than its worth. The MZR is very different from the regular MZ3 motors. Check out this thread from a guy who had the same problem with a 2.3 duratec (basically the same as the mazda 2.3)...
  2. A

    Name that sensor/bracket!, also P2507 and more!

    facing forward, what side of the engine is this? i recall a bracket like this being mounted near the transmission, left hand side below the battery. the remainder of the sensor cable wraps on the underside of the transmission. it would explain why your car is shifting funny as well if it has a...
  3. A

    Projector lights

    Hey guys, I have some seriously yellowed headlights on my 05 hatchback, the previous owner did f***all to take care of this thing. I cleaned up my last car with some putty and sanding/buffing but am thinking about going all out and getting a new aftermarket assembly and modding it a bit. I saw...
  4. A

    Engine Pull Guide?

    I did it from the top not too long ago. With the front end jacked up. Not much of a guide but start with removal of both the drive shafts and halfshafts from the front wheels (slide out the front shockstruts after disconnecting from the spindle) its better to come out with the whole tranny...
  5. A

    Coil Packs....Will they fit

    Well, I think some of the more senior guys should pipe in on this one. But if your cat keeps getting clogged, its due to the misfire you're getting from the engine non? Lack of spark and build up of fuel + late spark creates that overly rich mixture that will eventually clog up your cat with...
  6. A

    Coil Packs....Will they fit

    hey bud, as long as its based for the same year it should be the same between engines. The coil and boot look exactly the same in the picture you provided, not sure if there is a difference between output at all but its not sending any codes on mine. The difference between years is apparent...
Back