-
-
ADS-B replied to the thread 2013~2016 CX-5 Keyless Entry - Weird IssueHave you considered to replace the push to start assembly? -
Mechanic put obd on it and it read cylinder one not working. Plugs and coils delivery due Sunday.
-
ADS-B replied to the thread 2013~2016 CX-5 Misfire while drivingBefore replacing the coils, replace the obvious: spark plugs. All four of them!
-
Oil change number two. 3862 mi.
-
'16 2.5L NA, 80,600m. Cleaned MAP and MAF sensors. Couldn't disconnect the MAP connector to save my life, so I removed the sensor and...
-
ADS-B reacted to RL911's post in the thread How to completely disable cylinder deactivation? with
Like.
I have disabled it on my 2019 Honda pilot, but I’m not aware of being able to do it on a Mazda. I purchased an aftermarket device that... -
ADS-B replied to the thread Guide Mazda Firmware Update InformationThe 32 GB might be too big. Try it with a smaller USB stick.
-
An update and a thanks. Installed a new OEM MAF tonight and all issues have been resolved. Thanks to all who offered tips and advice.
-
U Codes mean that there’s no communication between modules. They happen because the battery is dead/weak or got replaced. Some U codes...
-
Did an oil change yesterday using Kirkland 5W-30 and a Mazda OEM filter. Car is at 72k kms now. Also updated my infotainment firmware...
-
ADS-B replied to the thread How easy is DIY for the spark plugs?I've been using NKG Laser Iridium for a while now and absolutely no issues. A lot of guys on this forum are using them, too. If you live...
-
Enkei TSR-X 20X9.5 +40
-
LO all. I am Don and recently have a 2015 CX-5 AWD. Hope to pick up a lot of tips in this fine forum.
-
Well..I live in Holland in a small town near Rotterdam. Bought the Mazda about a year ago and I find the car very satisfying. Only...
-
ADS-B replied to the thread Problem with Air Conditioning...Suggestions?I guessed wrong, I guess... 😆
-
-
Loading…
-
Loading…
-
Loading…
