Latest activity
-
yrwei52 reacted to Digbicks1234's post in the thread 2013~2016 Anyone install Ruthenium Spark Plugs yet? with
Like.
I get that you need two probes but touching the base of the spark plug is easy, just touching the tip and getting it perfectly aligned... -
Mmurky replied to the thread Seat options? Miserable....I've gained 25 lbs or so since COVID made me a homebody. Now I kind of notice the side bolsters. It's not uncomfortable yet, but I...
-
NPost video w/ good quality audio.
-
TTr3c3 replied to the thread 5x115 vs 5x114.3 debate.Hi, I got a 2019 Touring, I wanted to get a 20" wheels before i change the tires.. where can I get cheap ones? TIA
-
Hello all - I figured I would share my experience with coating my CX-9 using a ceramic and hydrophobic solution. Products GTechniq C1... -
Bubbaj98 replied to the thread WTB: 1996 MX-6.I have a 96 Mazda mx-6 4cylinder 5 speed I lucked up on finding! -
-
I’ve looked every where and can never find nothing. I’ve found performance headers but that’s it. Can’t find a catback exhaust which is...
-
Cchiefmg replied to the thread NB MX-5 Hey, it's Minnie!.Got my new license plate lights. The new ones are slightly different from the originals as you can see on the left (fixed) side of both...
-
Cchiefmg replied to the thread NB MX-5 Hey, it's Minnie!.Finally got around to pulling the rear shocks. Let's take a walk through the procedure... First thing to do is remove the shock from...
-
Cchiefmg replied to the thread NB MX-5 Hey, it's Minnie!.I looked through my Tuner Studio settings to see if I could find anything wrong. Decided I would go ahead and recalibrate my TPS, IAT...
-
Cchiefmg replied to the thread NB MX-5 Hey, it's Minnie!.I had to pull out of the cruise. As I was getting off the freeway to the Columbus meeting point she died with no warning. The AFR gauge...
-
Cchiefmg replied to the thread NB MX-5 Hey, it's Minnie!.The Feal top hats showed up. I considered installing them, but wouldn't have enough time for a shake-down run before the next day's...
-
Cchiefmg replied to the thread NB MX-5 Hey, it's Minnie!.I put the mounts on the wing. Put it all in place temporarily because I was waiting on my new Allen head screws to come in. Moved to...
-
Cchiefmg replied to the thread NB MX-5 Hey, it's Minnie!.Got started by replacing the Zoom gas filler door. First you have to remove the door (two bolts), the gas cap, four bolts at the base of...
-
Cchiefmg replied to the thread NB MX-5 Hey, it's Minnie!.Picked up my parts. Can you say beautiful? I can. Now to get it all installed...
