Post Pictures of Your CX-5 Mods, Upgrades and Accessories!

Installed aftermarket stainless steel door sill and rear bumper trim. I especially like the fact that the rear bumper trim extends over the edge.
Before.jpg


After.jpg


RAW3.jpg


Hood Struts. Yes!
20190314_172021.jpg


Pedal Covers for more speed!
The foot rest cover is double-sided taped to factory mats.
20190214_170915_0.jpg


Front hood trim. I think the car looks likes something is missing without this. Love the leading edge paint protection it offers too.

Hood before.jpg


Hood after.jpg


DupliColor brush-on caliper paint and Brembo decals sure dress up the brakes and prevent corrosion.

Brembo mod.jpg


Front.jpg


Rear.jpg


Yuk.jpg


Edit: By the way the paint was applied with calipers on the car. I just cleaned off surface corrosion with a fine wire brush, de-greased with kit supplied de-greaser and masked off parts and areas not to be painted.

Masking.jpg
 
DupliColor brush-on caliper paint and Brembo decals sure dress up the brakes and prevent corrosion.
Edit: By the way the paint was applied with calipers on the car. I just cleaned off surface corrosion with a fine wire brush, de-greased with kit supplied de-greaser and masked off parts and areas not to be painted.

Very clean job on the calipers. Good work.
 
Nice. I have the whole brake kit, that soon I will replace and also the caliper paint kit. I'm just trying to get out as much life as possible, from the original brakes.
 
View attachment 223255



Edit: By the way the paint was applied with calipers on the car. I just cleaned off surface corrosion with a fine wire brush, de-greased with kit supplied de-greaser and masked off parts and areas not to be painted.


I really like this.
so these are oem brakes correct with just brembo lettering over it?
can you post pics of the whole car, would love to see how it looks overall..great job man!
 
-oem front skid plate
-oem rear skid plate
-oem wind deflectors
-aftermarket roof spoiler
-aftermarket foglight DRL, sequential turn signals
-autoflex gloss oem black front grille and roof
-rear bumper sprayed with autoflex spray shield. (clear protection)



IMG_4283.JPG
 
I really like this.
so these are oem brakes correct with just brembo lettering over it?
can you post pics of the whole car, would love to see how it looks overall..great job man!
Yes, OEM brakes with caliper paint and heat resistant vinyl stickers. Here is the link to stickers, but he is temporarily out of white. They come in silver too.
https://www.amazon.com/dp/ (commissions earned)

On the front calipers, you will have to eliminate the Brembo circular logo as there is no room.

20200303_123032.jpg


20200303_123053.jpg


20200303_123225.jpg


20200303_123243.jpg
 

Attachments

  • 20200303_123225.jpg
    20200303_123225.jpg
    816.9 KB · Views: 209
I see lots of posts about mats, skins, but no one has pictures! Can we start?
This way the entered CX 5 Community can Swag up together!

I can't start yet because I still have My Honda CRV which I haven't sold yet Unless you want to see my accessories
In any case, shall we begin?

Hey Guys, I recently added the OEM LED fog light kit from Mazda to my 2019 CX-5 Touring, LED switch-back DRL/Turn Signal upgrade and changed the brake lights and rear turn signal bulbs to LED. Also upgraded the interior lights to LED.

Car Video Link. https://share.icloud.com/photos/0F79bF_GN00iYe20tVW22bFMA

Switch-Back LEDS - LED bulbs that run 6000K color temperature (white) and then switch to Amber color when turn signals are activated- once turn is complete the LED’s “switchback” to white
I recommend LASFIT as there are no codes or hyperflashing with their brand- also not LED load resistors are needed.

LASFIT CANBUS Anti Hyper Flash 7443 7444 T20 Dual Color Switchback LED Amber Turn Signal Light Blinker Bulbs, White Daytime Running Parking Light, No Load Resistor Need, Standard Socket (Pack of 2)
by Onemore Auto
Learn more: https://www.amazon.com/dp/ (commissions earned)

LASFIT 7443 7444 CANBUS LED Brake Light Bulb, Error Free LED Bulbs, Red Light(2pcs)
by Onemore Auto
Learn more: https://www.amazon.com/dp/ (commissions earned)

LASFIT 7440 Anti Hyper Flash Canbus LED Turn Signal Light W21W WY21W Blinker Bulbs, No Load Resistor Need, 2019 Upgraded Intelligent Temperature Control Version- Amber Yellow (Pack of 2)
by Onemore Auto
Learn more: https://www.amazon.com/dp/ (commissions earned)
 

Attachments

  • 0E5E598E-1EE1-4E8A-AB9D-953299200553.jpeg
    0E5E598E-1EE1-4E8A-AB9D-953299200553.jpeg
    2 MB · Views: 429
  • 1690258C-2BDB-484C-AAEF-2C517B5CCD9A.jpeg
    1690258C-2BDB-484C-AAEF-2C517B5CCD9A.jpeg
    1.6 MB · Views: 425
  • 03D2490E-E8DB-4E05-889F-6E70859A2F9C.jpeg
    03D2490E-E8DB-4E05-889F-6E70859A2F9C.jpeg
    1.2 MB · Views: 428
  • F0D1EABC-7935-437F-8725-F259C9C7C802.jpeg
    F0D1EABC-7935-437F-8725-F259C9C7C802.jpeg
    645.5 KB · Views: 425
-oem front skid plate
-oem rear skid plate
-oem wind deflectors
-aftermarket roof spoiler
-aftermarket foglight DRL, sequential turn signals
-autoflex gloss oem black front grille and roof
-rear bumper sprayed with autoflex spray shield. (clear protection)



View attachment 223297
Which aftermarket rear roof spoiler you bought? Also do you have a side pic to see the roof spoiler?
 
Damn, that black roof looks siiiiiiiiiiiick!
Thanks man..i usually vinyl my roof, but this time around i used autoflex, it looks just like oem paint but it's peelable. You can't beat it...lucky for me there is a good installer in NYC.
 
Back