MSP part out

I'd like to sell as a whole but will part out if necessary. Engine had the rod thrown threw the block and after 2 engine rebuids over the past 3 years I'm giving up. Clutch, water pump, oil pump, all belts, maf, coil packs and 8mm wires, turbo, pistons (if they're still good) have less than 7,000 miles on them. Engine rebuild was supposed to be forged but after looking at receipts it looks like they only put forged pistons. The car has a front mount intercooler with hard pipes and a greddy type rs vta bov. Exterior is probably a 6 out of 10 and interior is 9 out 10. Looking to get $2,000 as is.
 
still have the 2 intake manifolds, EGR, 2 MAF sensors, camshaft gears, some misc sensors, newer tension bearing, good turbo housing (destroyed guts), valve cover and I'm sure some other things. Please make offers. I Hated to send the car to the junkyard and will hate to just throw these things away.
 
Speeding, you still open for business by chance? I know I/m late to the party but thought I'd see if the struts assemblies are still available.

Thanks.
 
Just a heads up to everyone that this thread does not have all the required pics (according to our Marketplace Rules), buyers beware.
@MP5wagonhawk I know you're aware because of my other post...Good luck with your search!
 
Thanks and yes, I'm aware of it and since we're on the topic, is if safe to say I shouldn't hit these guys up from old posts that never put up pics (as a shot in the dark)? I don't want to mess anything up on my end so thought I'd ask.

Thanks.
 
I have 2 intake manifolds (1 more complete than the other), 2 MAF sensors, can gears, 2 VTCS/VICS solenoids and a valve cover. Make offers. I’ll probably be putting in the trash in the near future.
 

Attachments

  • 95CF4F18-E5A5-4452-A62F-772D52BE4B41.jpeg
    95CF4F18-E5A5-4452-A62F-772D52BE4B41.jpeg
    197.2 KB · Views: 169
  • 518AAAB7-32C7-4F73-918E-97D7E01397A5.jpeg
    518AAAB7-32C7-4F73-918E-97D7E01397A5.jpeg
    151.9 KB · Views: 161
  • 6C0C5BAD-4035-4BB9-AC51-72999FE40C99.jpeg
    6C0C5BAD-4035-4BB9-AC51-72999FE40C99.jpeg
    278.5 KB · Views: 155
  • 71CF8A66-2BD0-450E-BBB4-7667F087E040.jpeg
    71CF8A66-2BD0-450E-BBB4-7667F087E040.jpeg
    183.2 KB · Views: 159
  • 88A5F1A7-7465-412E-9FBA-A5219552B869.jpeg
    88A5F1A7-7465-412E-9FBA-A5219552B869.jpeg
    194.9 KB · Views: 155
  • 08946221-DB82-4AC4-A6D3-C4B446CD45AB.jpeg
    08946221-DB82-4AC4-A6D3-C4B446CD45AB.jpeg
    233.2 KB · Views: 164
  • 84328F8B-48E3-48C1-884C-A7C9CC020236.jpeg
    84328F8B-48E3-48C1-884C-A7C9CC020236.jpeg
    233.2 KB · Views: 165
  • DDCFD1DA-F561-4AD5-831B-BF5F139617BC.jpeg
    DDCFD1DA-F561-4AD5-831B-BF5F139617BC.jpeg
    235.2 KB · Views: 164
Thanks and yes, I'm aware of it and since we're on the topic, is if safe to say I shouldn't hit these guys up from old posts that never put up pics (as a shot in the dark)? I don't want to mess anything up on my end so thought I'd ask.

Thanks.
Sorry for the late reply, missed this one...I wouldn't recommend it unless you can have them follow the Marketplace rules and send you the required pics.

I have 2 intake manifolds (1 more complete than the other), 2 MAF sensors, can gears, 2 VTCS/VICS solenoids and a valve cover. Make offers. I’ll probably be putting in the trash in the near future.
Please post pics with the required signage, you can PM me when you have the pics and I'll be happy to unlock the thread, thanks.
 
Last few things left. Wastegate, coolant thingy, cam gears, VICS/VTCS solenoids, intake mani’s, MAF’s and valve cover. Prefer pickup but willing to ship at your expense. Make offers!!!
 

Attachments

  • 9D9C692B-D538-4087-9A64-8AEBC808CCED.jpeg
    9D9C692B-D538-4087-9A64-8AEBC808CCED.jpeg
    165.1 KB · Views: 165
  • 118C7CD8-D666-4977-BDC8-7DEFE020A7FC.jpeg
    118C7CD8-D666-4977-BDC8-7DEFE020A7FC.jpeg
    173 KB · Views: 188
  • 4A067013-9819-43C1-9421-790C30822578.jpeg
    4A067013-9819-43C1-9421-790C30822578.jpeg
    167.6 KB · Views: 168
Back