Did some prep work for installing my hard top. Cut the trim panels for the side strikers and put those on, along with my F-bolts. Went to my storage, dug the top out and put it on. When I got home I looked at installing the Beatrush latches. I thought they used the factory striker plates but they don't. So those came back off. Got the Beatrush parts installed, also replaced the rubber isolater on the right side rear latch (that fits over the F-bolt). Those are side specific and when I first ordered replacements I was sent two of the same. The JIS screwdrivers I bought from Revlimiter proved their worth yet again, as the screw holding the top cover on the rear latch gave me a hard time the last go-around when I used a standard size Philip's. Everything is all fitted up and secure.
I didn't take any pictures of the Beatrush install as there are plenty of those floating around. I'll get a picture of the hard top in place with my present configuration soon.
I didn't take any pictures of the Beatrush install as there are plenty of those floating around. I'll get a picture of the hard top in place with my present configuration soon.