- :
- Completely Stock P5
Thats using the Moly Lube correct?
could have swore I had those on there already, ill add them in a few
All ARP values are with the lube.
Thats using the Moly Lube correct?
could have swore I had those on there already, ill add them in a few
Does anyone have the Connecting Rod Bearing oil clearances?
Is this for a Mazda CX-9 2010 3.7 8 vin# v?Alot of people on here ask about torque specs for engine components, and you cant really find it anywhere online so i figured i would post this stuff for everybody's use
(Plus i had to type it up for a friend anyways lol)
*Cylinder Head*
Assembly: Looking at the top of the head, front of engine on left
(8) (4) (1) (5) (9)
(7) (3) (2) (6) (I0)
-1st Step: 17.2-22.0 Nm (2.7-16.2 ft lbs)
-2nd Step: tighten another 85*-95* in order
-3rd Step: tighten another 85*-95* in order
*ARP Head Studs*
-Tighten in the above order
-Use ARP Moly Lube
-30 ft-lbs, then 60 ft-lbs, then 90 ft-lbs
*Cylinder Head Bolts Limits*
-Standard Length: 99.2-99.8 mm (3.91-3.92 in)
-Max. Length: 100.5mm (3.956 in)
*Camshaft Cap Bolt*
Assembly: Looking at the top of the head, front of engine on left
(19) (11) (3) (7) (15)
(17) (9) (1) (5) (13)
(18) (I0) (2) (6) (14)
(20) (12) (4) (8) (16)
Torque: 11.3-14.2 Nm (12.7-16.2 ft lbs)
*Main Bearing Cap*
Assembly: Looking at the crank, flywheel end on the right
(8) (4) (1) (5) (9)
(7) (3) (2) (6) (I0)
-Torque: 54-58 Nm (40-43 ft lbs)
-ARP Main Stud Torque- 60 ft lbs W/ MOLY LUBE
*Connecting Rod Nut*
-Torque: 48-50 Nm (35-36 ft lbs)
*Pauter Connecting Rod Nut*
-Torque: 50 ft lbs
*Crankshaft Pulley*
-Pulley to pulley boss: 12.3-17.1 Nm (109-151 in lbs)
-Pulley Boss to crankshaft: 157-166 Nm (116-122 ft lbs)
*Flywheel/Flex Plate*
-Torque: 92-102 Nm (70.9-75.9 ft lbs)
*Oil Pump*
-Torque: 19-25 Nm (14-18 ft lbs)
*Tip Clearance
-Standard: .02-.018 mm
-Max: .22 mm
*Max. Body Clearance
-Standard: .09-.18 mm
-Max: .22 mm
*Side Clearance
-Standard: .03-.11mm
-Max: .14 mm
*Water Pump*
-Torque: 7.9-10.7 Nm (69.5-95.4 in lbs)
Thats it for the torque specs I have, if anybody has any i didnt list, let me know and ill add them to the list
I had to use an I instead of a 1 in the 10's or else this would show up (10)
The clearances will be updated in the next post, but it will take me a while to type them
@gargola23 Sorry, you're in the Mazda Protege section so these specs are specific to the Protege.Is this for a Mazda CX-9 2010 3.7 8 vin# v?