Search results

  1. T

    RX8 differential Mount fit on NC Differential?

    A friend broke the differential mount on his 2006 NC Miata at an autocross event 2 hours from home. There is an RX8 in a junkyard and we are wondering if the differential mount from the rx8 will work on the NC. They pull up under different Mazda part numbers but we heard it is because the RX8...
  2. T

    Dash Lights have stopped working and fan speed switch wires are getting really hot

    Today after removing and reinstalling my aftermarket double din stereo, the dash lights stopped working and i also discovered that the big black and blue wires on the fan speed switch are getting very hot. Not sure if those two things are connected. Interior fuses are all fine. Cant seem to...
  3. T

    Rear Lateral Link Replacement parts?

    I am redoing the suspension in the rear of my P5 and need to replace the rear lateral links. Are all 4 identical to each other? On Rockauto there are several different brands and i am not sure what parts to order. I know there is a difference with the in the length if you have drum brakes which...
  4. T

    Need new struts and mounts, anybody had issues with Monroe Quickstruts?

    I am needed to replace all my suspension components very badly as everything is shaking, popping, and rattling from all 4 corners of the vehicle. I am hoping to avoid the hassle of using spring compressors and am looking at Monroe quickstruts for the P5. Has anybody had any issues with these...
  5. T

    Grinding, rubbing, whirring noise coming from transmission after replacing clutch

    As the title says, I am getting a grinding noise coming from the transmission area after I replaced the clutch, flywheel, rear main seal, and axle seals. It has gotten progressivily worse and isnt tied to the Engine because it varies by car speed not engine RPM. Also the noise gets worse when...
  6. T

    Flywheel bearing seized and ground down the end of the tranns shaft. How boned am I?

    I pulled my manual trans today to replace the rear main seal, RTV the MBSP bolts, and replace the clutch and flywheel. I pulled the trans, clutch, and flywheel and saw that the bearings were seized to s*** and left rusted metal dust everywhere. I inspected the trans shaft and it appears that it...
  7. T

    Want to swap in the 2003 console for the better cupholders

    I found a donor car in a junkyard that is 4 hours from me (sadly the closest P5 I could find on Row52) that is a 2003 automatic. I plan on stealing the console for to get the better cupholders but my car is a 2002 manual. Are the automatic and manual consoles identitcal?
  8. T

    Do I need to replace the Flywheel

    I will be replacing my clutch soon. Do I need to replace my flywheel along with the clutch? Also is there a guide for clutch replacement for the P5?
Back