P5 with 15x6 +40mm offset

I checked my parts car and it has no dust caps at all and I checked RockAuto and couldn't find anything.

I actually went to the junkyard and got 2 more, but the hub is slightly different in the front so these can't actually be placed in the front ones.
 
I actually went to the junkyard and got 2 more, but the hub is slightly different in the front so these can't actually be placed in the front ones.

That's what I was wondering.
The fronts don't have much of a lip to catch the caps.

A bit of grease is always good though.
It stops any rust and helps make any removal easier. (like for front wheel bearings)
 
That's what I was wondering.
The fronts don't have much of a lip to catch the caps.

A bit of grease is always good though.
It stops any rust and helps make any removal easier. (like for front wheel bearings)

Just keep in mind that the front has a sealed bearing and while not critical that it has a hub cover as long as you don't live where salt and water and aplenty it's ok.

The rears, OTOH are conventional ball bearings and they NEED to be sealed.
 
Back