Media added by JasonBourne

New Media Comments

  • IMG_20260102_180715574.webp
    The headlights are grounded to the horizontal bracket
  • IMG_20260102_180655666.webp
    There is a vacant, threaded grounding point in the lower right corner.
  • IMG_20260102_180641195.webp
    This is a 1/2 inch round head bolt that I picked up from HD a few days ago. A longer one would probably work for the two points on the engine. The ring connector is flush against the underside of the bracket. Here I was able to secure the nut with a 10mm socket while tightening the top.

Media Stats

Categories
13
Albums
18
Uploaded media
120,865
Comments
67
Disk usage
21 GB
DSC01281.GIF

DSC01281.GIF

  • Reactions 0
  • Comments 0
DSC01280.GIF

DSC01280.GIF

  • Reactions 0
  • Comments 0
DSC01277.GIF

DSC01277.GIF

  • Reactions 0
  • Comments 0
DSC01276.GIF

DSC01276.GIF

  • Reactions 0
  • Comments 0
DSC00846.GIF

DSC00846.GIF

  • Reactions 0
  • Comments 0
DSC00844.GIF

DSC00844.GIF

  • Reactions 0
  • Comments 0
DSC00371.JPG

DSC00371.JPG

  • Reactions 0
  • Comments 0
DSC00370.JPG

DSC00370.JPG

  • Reactions 0
  • Comments 0
DSC00369.JPG

DSC00369.JPG

  • Reactions 0
  • Comments 0
DSC00332.JPG

DSC00332.JPG

  • Reactions 0
  • Comments 0
DSC00271.JPG

DSC00271.JPG

  • Reactions 0
  • Comments 0
P1000477.JPG

P1000477.JPG

  • Reactions 0
  • Comments 0
P1000476.JPG

P1000476.JPG

  • Reactions 0
  • Comments 0
353b_1.jpg

353b_1.jpg

  • Reactions 0
  • Comments 0
4be2_1.jpg

4be2_1.jpg

  • Reactions 0
  • Comments 0
3b81_1.jpg

3b81_1.jpg

  • Reactions 0
  • Comments 0
P1000436.JPG

P1000436.JPG

  • Reactions 0
  • Comments 0
P1000434.JPG

P1000434.JPG

  • Reactions 0
  • Comments 0
P1000433.JPG

P1000433.JPG

  • Reactions 0
  • Comments 0
P1000432.JPG

P1000432.JPG

  • Reactions 0
  • Comments 0
P1000430.JPG

P1000430.JPG

  • Reactions 0
  • Comments 0
P1000430.JPG

P1000430.JPG

  • Reactions 0
  • Comments 0
P1000428.JPG

P1000428.JPG

  • Reactions 0
  • Comments 0
P1000231.JPG

P1000231.JPG

  • Reactions 0
  • Comments 0
Back