Group Buy: 505 Intake Manifold Round 2

[paniaguae640]

Whats the benefit of blocking off the egr?

 

[Dpwhitehead1]

Whats the benefit of blocking off the egr?

probably none. but full standalones dont need them

 

[MSP2003.5_Nick]

its more like its easier not to have it with a standalone because its a nightmare to try and wire and program it to work, unless you kept the stock ecu in the car to run that stuff but even that can have it's problems. Might as well just block it off and call it a day.

Benefits would be more consistent tuning without random exhaust gas in there, so easier to get the air/fuels you want and less carbon in the intake. Also peace of mind knowing that it's not gonna get gummed up and break or stay open while in boost.

In my opinion as soon as you start modifying a car heavily for power you may as well just rip out all your fuel economy and emissions s***. Cant have both, choose power or economy. I dunno thats just how I roll lol.

 

[Protegebuddy]

Bump...

 

[Protegebuddy]

Will these include a new IM gasket?

 

[Silverspeed2015]

good question!

 

[Ricktalife]

Most likely no. Just go to rockauto.com or a local stealership.

 

[justanothermp5]

So can we get the ball rolling on this or what? I need one of these pretty soon, dont feel like tearing s*** apart once I put it back together

 

[destineal]

the ball is rolling. 505 has to reapply for AMM 1st

 

[Silverspeed2015]

i dont think it would take much to rip the IM off agian and replace with the 505

 

[2.0t03speed]

just a word of advice for anyone who get one of these. Install the fuel raill while the manifold is off of the car. Also when you do it put some lithium grease on the lower oring that sits in the manifold for the injectors to ensure you get a good seal. Because let me tell you doing it while its on the car might prove to be a challenge for some that shorter and bigger forearms then my self.

 

[MassJDM]

How much are these in the group buy and can i still get one?? i really really want one!! have cash in hand!!

 

[MassJDM]

does it cost more for the different coatings/colors?? how much?

 

[Protegebuddy]

How much are these in the group buy and can i still get one?? i really really want one!! have cash in hand!!

There are 3 more spots left it looks like (20 of 23), add yourself before this hot rare item is gone!

 

[Tzar177]

Is there an option for an upgraded/better looking fuel rail? A perrin would be nice but can't find them

 

[OH10_MSP]

1. needmspspeed
2. J_Naoto
3. Ricktalife
4. Justanothermp5
5. Spiced MSP
6. Iggypop
7. fuadmsp
8. protegebuddy
9. scmp3
10. Funkalicious21
11. Destineal
12. Outlawstar98
13. ricky
14. boostdprotegelx
15. paniaguae640
16. Silverspeed2015
17. Tzar177
18. Youngblud
19. Nicholsspeed
20. msp2003.5_nick
21. OH10_MSP
22.
23.

 

[Protegebuddy]

Is there an option for an upgraded/better looking fuel rail? A perrin would be nice but can't find them

Yeah, I guess the IM was designed to be used with stock or perrin fuel rails. I think I asked that question a few posts ago on the perrin fuel rail GB going on right now.
http://www.mazdas247.com/forum/showthread.php?123791067-GB-Perrin-Fuel-Rails-*Your-choice-of-Color*

 

[Ricktalife]

There are 3 more spots left it looks like (20 of 23), add yourself before this hot rare item is gone!

I don't think there was a cap on the list. If anything, I'm sure Rich would love to have more buyers than he originally estimated. The more interest we have, the more beneficial it will be for Rich and the machine shop to produce them.

 

[505zoom]

My AMM payment was verified this morning, so I should be ready to go here in the next couple days. I am going to leave this open for people to get in on through this coming weekend. First thing next week material will be purchased and the GB will close. At that point I will start taking deposits from anyone that wants to lock in their spot.

That Perrin GB is the best bet for anyone looking for a upgraded fuel rail.

Powdercoat WILL be available, and a coated mani with EGR will be in the 850 neighborhood.

 

[MassJDM]

please pm me with info on where to send payment and what colors will be available for powder coating?