What have you done to your MS3 today?

^ i appreciate the enthusiasm... but you've only increased the track with of the car by .6%, any difference you feel is in your head!
 
Last edited:
Yes not yellow, the change is minimal. But keep in mind that not one but all four wheels have been alter. If you don't drive aggressive every day then you won't notice it. I'm talking about like taking a 90 degree turn like at 30 or 35mph and stuff. I notice a slight change when enteng into a corner. Everything else feels the same.

peavey, they are H&R 5mm spacers.

http://i278.photobucket.com/albums/kk108/hugador/HRSportSpringsHRWheelSpacers5mm-1.jpg
 
Last edited:
gotcha, my math was off. but it's still only a .6% increase in track width. but if you are feeling it then keep rocking it!
 
Went flying around in the 8 inches of snow we got today and had a blast.....

Then went home to spend more time looking for some affordable and lightweight 18x7 wheels that do not exists.
 
just looked at it sitting in the garage. hasn't been getting a lot of action this winter but looking forward to an early march track day.

5353326201_62e4394476_z.jpg
 
tried for the third time to remove the stuck stud on the second cat so i could install my test pipe.

stud = 3
me = 0

gonna take it to a shop next week to see if they can remove it for me...
 
Started. Hearing a clicking noise coming from the engine bay. Its neither constant nor consistant. At first I thought it was the normal loud LSD but with the clutch in I still hear it

This is an idling noise as well. Stuck my ears under the hood for a few minutes, couldn't tell where it was coming from. Too cold to really give it a good lookie-loo with jack stands involved

So I can add that to the squeaky brake, rattling dash, noisy LSD, chirping seat belt, crinkly piano finish trim, clunky rear end on bumps.....
 
Pulled the tires off the stock rims to powder coat them. New tires (street and slicks) coming soon along with race wheels.

New air filter on the way.
 
Back