g35 wheels

[Redrocketms3]

has anyone seen our cars with the forged g35 wheels. i know they use 5x114.3, and they are 19x8 and 19x8.5, so they would be a pretty good fitment.

http://www.wheels-and-rims.com/images/ALY73683U.jpg

 

[Kain]

The G35 wheels have a center bore of 66.1, while our hubs are 67.1.

 

[Jdm_Mica]

Hub rings should solve that problem

 

[Sport6]

The G35 wheels have a center bore of 66.1, while our hubs are 67.1.

Hub rings should solve that problem

Link to the hub rings that make the wheel's hub bore bigger?

 

[Kain]

Hub rings should solve that problem

Link to the hub rings that make the wheel's hub bore bigger?

In Bizarro World, hubcentric rings are made of anti-matter and increase the center bore.

 

[Dark]

Hub rings should solve that problem

You're a smart one. (hand)

 

[skallen]

In Bizarro World, hubcentric rings are made of anti-matter and increase the center bore.

lol!!!

 

[JamesCH]

Link to the hub rings that make the wheel's hub bore bigger?

Obviously he's talking about the hub rings that you find at a machine shop... chucked in the lathe... with a boring tool...

 

[STRICK-]

IDK, i test fitted g37 wheels and they fit fine. I found some for 1000$ on craigslist with good tires. I would think g35/37 would be the same??? hmmm

 

[bigdaddy]

You're a smart one. (hand)

well, judging by literally every post you have made, you are a dick(spank)

 

[madvillian]

I would imagine that they weigh a ******* ton, even though they're 'forged'

 

[vrspeedemon]

Pretty sure the ms3 and ms6 have the same hub bore, if you guys check out page 6 in the ms6 members wheels thread you can see them on a ms6. Guy said he just used a sanding flap wheel on the center a little and they fit fine.
Not my cup of tea but at least it'll give you guys an idea.

 

[Kain]

Pretty sure the ms3 and ms6 have the same hub bore, if you guys check out page 6 in the ms6 members wheels thread you can see them on a ms6. Guy said he just used a sanding flap wheel on the center a little and they fit fine.
Not my cup of tea but at least it'll give you guys an idea.

It's only a 1 mm difference, could easily be bored out without compromising the integrity of the wheel. Or in the case you mentioned, ghetto'd by sandpaper. (eekdance)

 

[Redrocketms3]

I would imagine that they weigh a ******* ton, even though they're 'forged'

What would cause them to weigh a ton, i mean other than the fact that they are 19's. They are pretty legit, they are made by rays

 

[Saskatchewan17]

It's a good idea. It'd be nice to find two pairs of 19x8.5s so you don't have to stagger them... which is retarted in an FWD car methinks. Kain is right, you could just have the center bore machined out. I'd like to see how they look... I'm not the biggest fan of 19s on an MS3.