What have you done to your MS3 today?
- Thread starter ZoomVT
- Start date
Put stock wheel and waiting for my Cobb Sri and New AP
That pic is too cool - looks like a diorama. Is that car only 2" tall?
H3br3w_Ham3r
Member
- :
- 2008 Mazdaspeed3
Me going for a few laps and then I turn into a rallyist!!!
http://www.youtube.com/watch?v=nGlINdQ4TWs
http://www.youtube.com/watch?v=nGlINdQ4TWs
MikeHTally
Member
- :
- 2008.5 Speed3, 2006 Chrysler 300C, 2003 Ram 1500
I was thinnin' the same thing. Thought it was a staged toy.
08SPEED3Veteran
Member
- :
- 08 Mazdaspeed 3 GT
thats good stuff lol. i love the mud flying all over the place. glad to see everything ended up ok!
08SPEED3Veteran
Member
- :
- 08 Mazdaspeed 3 GT
tomorrow i will be installing drilled and slotted rotors, pads, painting calipers red with G2 calper paint, installing spin on oil conversion, changing oil, and installing PG reworked turbo. lots to do. i would install the trz tranny mount but im waiting for the stock trans mount bracket to come in the mail. (the one with that bolts directly to the tranny with three bolts)
Shiroi_ms3
Member
- :
- 2008 Mazdaspeed3
I got my rear emblem stolen today. Time to try and buy those little plugs to plug it up, because I am not shelling out 35 bucks for a new emblem.
what?? Someone actually went to the effort of stealing the emblem off the back of your car?
Shiroi_ms3
Member
- :
- 2008 Mazdaspeed3
apparently yes, I had the cut out M emblem, it was still there last night, got up today and it was gone, so I just went with the two little plugs to cover up the hole.
Here is a quick cell pic. or two.
chief_wiggum
Member
- :
- 2008.5 Mazdaspeed3-2010 Mazda5 GT
Thanks!
Shiroi_ms3
Member
- :
- 2008 Mazdaspeed3
looking good ^^^
where did you get the plugs and what size?
MikeHTally
Member
- :
- 2008.5 Speed3, 2006 Chrysler 300C, 2003 Ram 1500
It does look cleaner. I've considered that a few times, even to the point of snooping around under the panel. I just can't bring myself to remove the wiper... I use it a fair bit.
Shiroi_ms3
Member
- :
- 2008 Mazdaspeed3
Home depot, in the isle with all the screws and such, 1/4 of an inch in size. they fit perfectly, and are much cheaper ( less than a buck) then trying to fill the holes and get them painted.
Tronspeed3
Member
- :
- MazdaSpeed 3 GT, Pearl White
Seafoamed , changed oil, changed to AMSOIL MTG transfluid, changed to Denso ITV20 spark plugs.
I pulled out of my driveway in front of some poor guy after putting the seafoam in and smoke screened the entire street! haha I can only imagine what they were thinking!
I pulled out of my driveway in front of some poor guy after putting the seafoam in and smoke screened the entire street! haha I can only imagine what they were thinking!
bradboyd80
Member
- :
- '12 Velocity Red MS3
Where did you inject the seafoam (pcv, brake booster, etc)?
- :
- 2010 Mazda5 GT
I picked up my '03 P5 today. So the MS3 will need to be sold post-haste. Check the post below for info on it and some pics the seller took prior to me picking it up:
http://www.msprotege.com/forum/showpost.php?p=5233197&postcount=14
I'll still be on 247...just a different section now. Bittersweet for sure. I enjoyed my 1 year and 9 months in the MS3 and all of the help here.
http://www.msprotege.com/forum/showpost.php?p=5233197&postcount=14
I'll still be on 247...just a different section now. Bittersweet for sure. I enjoyed my 1 year and 9 months in the MS3 and all of the help here.
