Car Scanner ELM OBD2
Version: 1.108.0/1.108.0/iOS
DTC report
Connection profile: Mazda OBD-II / EOBDDate: 7/24/2024 5:50:28 PM
VIN: JM3*******
============================
OBD-IIOBD-II
DTCs: 247
----------------------------
P0451 [0x0451]
Evaporative emission (EVAP) pressure sensor - range/performance problem
Status: Confirmed
----------------------------
P0451(00) [0x045100] Archive (inactive)
Evaporative emission (EVAP) pressure sensor - range/performance problem
Status: Confirmed, Test failed since last DTC clear, Test not completed during this operation cycle
----------------------------
P0010(00) [0x001000]
Camshaft position (CMP) actuator, intake/left/front, bank 1 - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0011(00) [0x001100]
Camshaft position (CMP), intake/left/front, bank 1 - timing over-advanced/system performance
Status: Test not completed during this operation cycle
----------------------------
P0012(00) [0x001200]
Camshaft position (CMP), intake/left/front, bank 1 - timing over-retarded
Status: Test not completed during this operation cycle
----------------------------
P0016(00) [0x001600]
Crankshaft position/camshaft position, bank 1 sensor A - correlation
Status: Test not completed during this operation cycle
----------------------------
P0018(00) [0x001800]
Crankshaft position/camshaft position, bank 2 sensor A - correlation
Status: Test not completed during this operation cycle
----------------------------
P0020(00) [0x002000]
Camshaft position (CMP) actuator, intake/left/front, bank 2 - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0021(00) [0x002100]
Camshaft position (CMP), intake/left/front, bank 2 - timing over-advanced/system performance
Status: Test not completed during this operation cycle
----------------------------
P0022(00) [0x002200]
Camshaft position (CMP), intake/left/front, bank 2 - timing over-retarded
Status: Test not completed during this operation cycle
----------------------------
P0030(00) [0x003000]
Heated oxygen sensor (HO2S) 1, bank 1, heater control - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0040(00) [0x004000]
Oxygen sensor signals swapped, bank 1 sensor 1/bank 2 sensor 1
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P0041(00) [0x004100]
Oxygen sensor signals swapped, bank 1 sensor 2/bank 2 sensor 2
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P0050(00) [0x005000]
Heated oxygen sensor (HO2S) 1, bank 2, heater control - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0053(00) [0x005300]
Heated oxygen sensor (HO2S), bank 1, sensor 1 - heater resistance
Status: Test not completed during this operation cycle
----------------------------
P0054(00) [0x005400]
Heated oxygen sensor (HO2S), bank 1, sensor 2 - heater resistance
Status: Test not completed during this operation cycle
----------------------------
P0059(00) [0x005900]
Heated oxygen sensor (HO2S), bank 2, sensor 1 - heater resistance
Status: Test not completed during this operation cycle
----------------------------
P0060(00) [0x006000]
Heated oxygen sensor (HO2S), bank 2, sensor 2 - heater resistance
Status: Test not completed during this operation cycle
----------------------------
P0068(00) [0x006800]
Manifold absolute pressure (MAP) sensor/mass air flow (MAF) sensor - throttle position correlation
Status: Test not completed during this operation cycle
----------------------------
P0102(00) [0x010200]
Mass air flow (MAF) sensor/volume air flow (VAF) sensor - low input
Status: Test not completed during this operation cycle
----------------------------
P0103(00) [0x010300]
Mass air flow (MAF) sensor/volume air flow (VAF) sensor - high input
Status: Test not completed during this operation cycle
----------------------------
P0104(00) [0x010400]
Mass air flow (MAF) sensor/volume air flow (VAF) sensor - circuit intermittent
Status: Test not completed during this operation cycle
----------------------------
P0111(00) [0x011100]
Intake air temperature (IAT) sensor - range/performance problem
Status: Test not completed during this operation cycle
----------------------------
P0112(00) [0x011200]
Intake air temperature (IAT) sensor - low input
Status: Test not completed during this operation cycle
----------------------------
P0113(00) [0x011300]
Intake air temperature (IAT) sensor - high input
Status: Test not completed during this operation cycle
----------------------------
P0114(00) [0x011400]
Intake air temperature (IAT) sensor - circuit intermittent
Status: Test not completed during this operation cycle
----------------------------
P0116(00) [0x011600]
Engine coolant temperature (ECT) sensor - range/performance problem
Status: Test not completed during this operation cycle
----------------------------
P0122(00) [0x012200]
Throttle position (TP) switch A/accelerator pedal position (APP) switch A - low input
Status: Test not completed during this operation cycle
----------------------------
P0123(00) [0x012300]
Throttle position (TP) switch A/accelerator pedal position (APP) switch A - high input
Status: Test not completed during this operation cycle
----------------------------
P0128(00) [0x012800]
Coolant thermostat - coolant temperature below thermostat regulating temperature
Status: Test not completed during this operation cycle
----------------------------
P0131(00) [0x013100]
Heated oxygen sensor (HO2S) 1, bank 1 - low voltage
Status: Test not completed during this operation cycle
----------------------------
P0132(00) [0x013200]
Heated oxygen sensor (HO2S) 1, bank 1 - high voltage
Status: Test not completed during this operation cycle
----------------------------
P0133(00) [0x013300]
Heated oxygen sensor (HO2S) 1, bank 1 - slow response
Status: Test not completed during this operation cycle
----------------------------
P0135(00) [0x013500]
Heated oxygen sensor (HO2S) 1, bank 1, heater control - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0137(00) [0x013700]
Heated oxygen sensor (HO2S) 2, bank 1 - low voltage
Status: Test not completed during this operation cycle
----------------------------
P0138(00) [0x013800]
Heated oxygen sensor (HO2S) 2, bank 1 - high voltage
Status: Test not completed during this operation cycle
----------------------------
P013A(00) [0x013A00]
Heated oxygen sensor (HO2S) 2, bank 1 - slow response rich to lean
Status: Test not completed during this operation cycle
----------------------------
P013C(00) [0x013C00]
Heated oxygen sensor (HO2S) 2, bank 2 - slow response rich to lean
Status: Test not completed during this operation cycle
----------------------------
P013E(00) [0x013E00]
Heated oxygen sensor (HO2S) 2, bank 1 - delayed response rich to lean
Status: Test not completed during this operation cycle
----------------------------
P0141(00) [0x014100]
Heated oxygen sensor (HO2S) 2, bank 1, heater control - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0148(00) [0x014800]
Fuel delivery error
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P014A(00) [0x014A00]
Heated oxygen sensor (HO2S) 2, bank 2 - delayed response rich to lean
Status: Test not completed during this operation cycle
----------------------------
P0151(00) [0x015100]
Heated oxygen sensor (HO2S) 1, bank 2 - low voltage
Status: Test not completed during this operation cycle
----------------------------
P0152(00) [0x015200]
Heated oxygen sensor (HO2S) 1, bank 2 - high voltage
Status: Test not completed during this operation cycle
----------------------------
P0153(00) [0x015300]
Heated oxygen sensor (HO2S) 1, bank 2 - slow response
Status: Test not completed during this operation cycle
----------------------------
P0155(00) [0x015500]
Heated oxygen sensor (HO2S) 1, bank 2, heater control - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0157(00) [0x015700]
Heated oxygen sensor (HO2S) 2, bank 2 - low voltage
Status: Test not completed during this operation cycle
----------------------------
P0158(00) [0x015800]
Heated oxygen sensor (HO2S) 2, bank 2 - high voltage
Status: Test not completed during this operation cycle
----------------------------
P0161(00) [0x016100]
Heated oxygen sensor (HO2S) 2, bank 2, heater control - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0171(00) [0x017100]
System too lean, bank 1
Status: Test not completed during this operation cycle
----------------------------
P0172(00) [0x017200]
System too rich, bank 1
Status: Test not completed during this operation cycle
----------------------------
P0174(00) [0x017400]
System too lean, bank 2
Status: Test not completed during this operation cycle
----------------------------
P0175(00) [0x017500]
System too rich, bank 2
Status: Test not completed during this operation cycle
----------------------------
P0201(00) [0x020100]
Injector 1 - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0202(00) [0x020200]
Injector 2 - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0203(00) [0x020300]
Injector 3 - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0204(00) [0x020400]
Injector 4 - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0205(00) [0x020500]
Injector 5 - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0206(00) [0x020600]
Injector 6 - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0217(00) [0x021700]
Engine over temperature condition
Status: Test not completed during this operation cycle
----------------------------
P0219(00) [0x021900]
Engine over speed condition
Status: Test not completed during this operation cycle
----------------------------
P0222(00) [0x022200]
Throttle position (TP) sensor B/accelerator pedal position (APP) sensor B - low input
Status: Test not completed during this operation cycle
----------------------------
P0223(00) [0x022300]
Throttle position (TP) sensor B/accelerator pedal position (APP) sensor B - high input
Status: Test not completed during this operation cycle
----------------------------
P0297(00) [0x029700]
Vehicle over-speed condition
Status: Test not completed during this operation cycle
----------------------------
P0300(00) [0x030000]
Random/multiple cylinder(s) - misfire detected
Status: Test not completed during this operation cycle
----------------------------
P0301(00) [0x030100]
Cylinder 1 - misfire detected
Status: Test not completed during this operation cycle
----------------------------
P0302(00) [0x030200]
Cylinder 2 - misfire detected
Status: Test not completed during this operation cycle
----------------------------
P0303(00) [0x030300]
Cylinder 3 - misfire detected
Status: Test not completed during this operation cycle
----------------------------
P0304(00) [0x030400]
Cylinder 4 - misfire detected
Status: Test not completed during this operation cycle
----------------------------
P0305(00) [0x030500]
Cylinder 5 - misfire detected
Status: Test not completed during this operation cycle
----------------------------
P0306(00) [0x030600]
Cylinder 6 - misfire detected
Status: Test not completed during this operation cycle
----------------------------
P0315(00) [0x031500]
Crankshaft position system - variation not learned
Status: Test not completed during this operation cycle
----------------------------
P0316(00) [0x031600]
Misfire detected during start-up - first 1000 revolutions
Status: Test not completed during this operation cycle
----------------------------
P0320(00) [0x032000]
Crankshaft position (CKP) sensor/engine speed (RPM) sensor - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0325(00) [0x032500]
Knock sensor (KS) 1, bank 1 - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0330(00) [0x033000]
Knock sensor (KS) 2, bank 2 - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0340(00) [0x034000]
Camshaft position (CMP) sensor A, bank 1 - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0341(00) [0x034100]
Camshaft position (CMP) sensor A, bank 1 - range/performance problem
Status: Test not completed during this operation cycle
----------------------------
P0344(00) [0x034400]
Camshaft position (CMP) sensor A, bank 1 - circuit intermittent
Status: Test not completed during this operation cycle
----------------------------
P0345(00) [0x034500]
Camshaft position (CMP) sensor A, bank 2 - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0346(00) [0x034600]
Camshaft position (CMP) sensor A, bank 2 - range/performance problem
Status: Test not completed during this operation cycle
----------------------------
P0349(00) [0x034900]
Camshaft position (CMP) sensor A, bank 2 - circuit intermittent
Status: Test not completed during this operation cycle
----------------------------
P0351(00) [0x035100]
Ignition coil A, primary/secondary - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0352(00) [0x035200]
Ignition coil B, primary/secondary - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0353(00) [0x035300]
Ignition coil C, primary/secondary - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0354(00) [0x035400]
Ignition coil D, primary/secondary - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0355(00) [0x035500]
Ignition coil E, primary/secondary - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0356(00) [0x035600]
Ignition coil F, primary/secondary - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0420(00) [0x042000]
Catalytic converter system, bank 1 - efficiency below threshold
Status: Test not completed during this operation cycle
----------------------------
P0430(00) [0x043000]
Catalytic converter system, bank 2 - efficiency below threshold
Status: Test not completed during this operation cycle
----------------------------
P0442(00) [0x044200]
Evaporative emission (EVAP) system - small leak detected
Status: Test not completed during this operation cycle
----------------------------
P0443(00) [0x044300]
Evaporative emission (EVAP) canister purge valve - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0446(00) [0x044600]
Evaporative emission (EVAP) system, vent control - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0452(00) [0x045200]
Evaporative emission (EVAP) pressure sensor - low input
Status: Test not completed during this operation cycle
----------------------------
P0453(00) [0x045300]
Evaporative emission (EVAP) pressure sensor - high input
Status: Test not completed during this operation cycle
----------------------------
P0454(00) [0x045400]
Evaporative emission (EVAP) pressure sensor - circuit intermittent
Status: Test not completed during this operation cycle
----------------------------
P0455(00) [0x045500]
Evaporative emission (EVAP) system - large leak detected
Status: Test not completed during this operation cycle
----------------------------
P0457(00) [0x045700]
Evaporative emission (EVAP) system - leak detected (filler cap loose/off)
Status: Test not completed during this operation cycle
----------------------------
P0460(00) [0x046000]
Fuel tank level sensor - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0461(00) [0x046100]
Fuel tank level sensor - range/performance problem
Status: Test not completed during this operation cycle
----------------------------
P0462(00) [0x046200]
Fuel tank level sensor - low input
Status: Test not completed during this operation cycle
----------------------------
P0463(00) [0x046300]
Fuel tank level sensor - high input
Status: Test not completed during this operation cycle
----------------------------
P0504(00) [0x050400]
Brake pedal position (BPP) switch A/B - correlation
Status: Test not completed during this operation cycle
----------------------------
P0505(00) [0x050500]
Idle speed control (ISC) system - malfunction
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P0506(00) [0x050600]
Idle speed control (ISC) system - rpm lower than expected
Status: Test not completed during this operation cycle
----------------------------
P0507(00) [0x050700]
Idle speed control (ISC) system - rpm higher than expected
Status: Test not completed during this operation cycle
----------------------------
P050A(00) [0x050A00]
Idle air control (IAC) valve, cold start - performance problem
Status: Test not completed during this operation cycle
----------------------------
P050B(00) [0x050B00]
Ignition timing, cold start - performance problem
Status: Test not completed during this operation cycle
----------------------------
P050E(00) [0x050E00]
Exhaust temperature, cold start - out of range
Status: Test not completed during this operation cycle
----------------------------
P0532(00) [0x053200]
AC refrigerant pressure sensor - low input
Status: Test not completed during this operation cycle
----------------------------
P0533(00) [0x053300]
AC refrigerant pressure sensor - high input
Status: Test not completed during this operation cycle
----------------------------
P0562(00) [0x056200]
System voltage - low
Status: Test not completed during this operation cycle
----------------------------
P0563(00) [0x056300]
System voltage - high
Status: Test not completed during this operation cycle
----------------------------
P0572(00) [0x057200]
Cruise control/brake switch A - circuit low
Status: Test not completed during this operation cycle
----------------------------
P0573(00) [0x057300]
Cruise control/brake switch A - circuit high
Status: Test not completed during this operation cycle
----------------------------
P0579(00) [0x057900]
Cruise control system, multi-function switch input A - circuit range/performance
Status: Test not completed during this operation cycle
----------------------------
P0581(00) [0x058100]
Cruise control system, multi-function switch input A - circuit high
Status: Test not completed during this operation cycle
----------------------------
P060A(00) [0x060A00]
Engine control module (ECM), monitoring processor performance problem
Status: Test not completed during this operation cycle
----------------------------
P060B(00) [0x060B00]
Engine control module (ECM), A/D processing performance
Status: Test not completed during this operation cycle
----------------------------
P060C(00) [0x060C00]
Engine control module (ECM), main processor - performance problem
Status: Test not completed during this operation cycle
----------------------------
P061A(00) [0x061A00]
Engine control module (ECM), engine torque - performance problem
Status: Test not completed during this operation cycle
----------------------------
P061B(00) [0x061B00]
Engine control module (ECM), torque calculation - performance problem
Status: Test not completed during this operation cycle
----------------------------
P061C(00) [0x061C00]
Engine control module (ECM), engine rpm - performance problem
Status: Test not completed during this operation cycle
----------------------------
P061D(00) [0x061D00]
Engine control module (ECM), engine air mass - performance problem
Status: Test not completed during this operation cycle
----------------------------
P0620(00) [0x062000]
Alternator, control - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0625(00) [0x062500]
Alternator field terminal - circuit low
Status: Test not completed during this operation cycle
----------------------------
P0626(00) [0x062600]
Alternator field terminal - circuit high
Status: Test not completed during this operation cycle
----------------------------
P0645(00) [0x064500]
AC compressor clutch relay - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P064D(00) [0x064D00]
Engine control module (ECM), HO2S processor, bank 1 - performance problem
Status: Test not completed during this operation cycle
----------------------------
P064E(00) [0x064E00]
Engine control module (ECM), O2S processor, bank 2 - performance problem
Status: Test not completed during this operation cycle
----------------------------
P065B(00) [0x065B00]
Generator - control circuit range/performance
Status: Test not completed during this operation cycle
----------------------------
P1001(00) [0x100100]
Unable to Achieve Self-Test Function Or SCP Error; Unable to Achieve Self-Test Function or SCP Error
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P1101(00) [0x110100]
MAF Sensor Out Of Self Test Range
Mass Air Flow Sensor Circuit Out Of Self-Test Range; Mass Airflow Sensor Circuit out of Self-Test Range
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P1124(00) [0x112400]
Throttle Position Sensor Out Of Self Test Range
Throttle Position Sensor Signal Out Of Self Test Range; Throttle Position Sensor Signal Out of Self Test Range
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P1127(00) [0x112700]
Exhaust Not Warm, Downstream O2 Sensor
HO2S Bank 1 Sensor 2 Heater Not On During Key On Engine Running Self Test
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P115E(00) [0x115E00]
Status: Test not completed during this operation cycle
----------------------------
P1285(00) [0x128500]
Cylinder head over temp sensed
Status: Test not completed during this operation cycle
----------------------------
P1288(00) [0x128800]
Cylinder Head Temp Sensor Out Of Self Test Range
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P128A(00) [0x128A00]
Status: Test not completed during this operation cycle
----------------------------
P1299(00) [0x129900]
Cylinder Head Overtemperature Protection Active
Status: Test not completed during this operation cycle
----------------------------
P1336(00) [0x133600]
Crank / Cam Sensor Range / Performance
Status: Test not completed during this operation cycle
----------------------------
P1397(00) [0x139700]
System Voltage Out Of Self Test Range
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P144A(00) [0x144A00]
Status: Test not completed during this operation cycle
----------------------------
P1450(00) [0x145000]
Unable To Bleed Up Fuel Tank Vacuum
Unable To Bleed Up Fuel Tank Vacuum; EVAP Control System Fault
Status: Test not completed during this operation cycle
----------------------------
P1464(00) [0x146400]
A/C Demand Out of Self Test Range
Air Conditioning Control Signal Circuit
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P1501(00) [0x150100]
Vehicle Speed Sensor Out Of Self Test Range
Vehicle Speed Sensor Out Of Self Test Range; Vehicle Speed Sensor Out of Self Test Range
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P1575(00) [0x157500]
Pedal Position Out of Self Test Range
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P1646(00) [0x164600]
Status: Test not completed during this operation cycle
----------------------------
P1647(00) [0x164700]
Status: Test not completed during this operation cycle
----------------------------
P164A(00) [0x164A00]
Status: Test not completed during this operation cycle
----------------------------
P164B(00) [0x164B00]
Status: Test not completed during this operation cycle
----------------------------
P1650(00) [0x165000]
PSP Switch Out of Self Test Range
Power Steering Pressure Switch Out Of Range Fault; Power Steering Pressure Switch Out of Range Fault
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P1674(00) [0x167400]
Status: Test not completed during this operation cycle
----------------------------
P1703(00) [0x170300]
Brake Switch Out Of Self Test Range
Brake On/Off Switch Out Of Self Test Range; Brake On/Off Switch Out of Self Test Range
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P1705(00) [0x170500]
Not in P or N During KOEO / KOER
Transmission Range Sensor Out Of Self Test Range; Transmission Range Sensor out of Self Test Range
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P2096(00) [0x209600]
Post catalytic converter fuel trim (FT), bank 1 - too lean
Status: Test not completed during this operation cycle
----------------------------
P2097(00) [0x209700]
Post catalytic converter fuel trim (FT), bank 1 - too rich
Status: Test not completed during this operation cycle
----------------------------
P2098(00) [0x209800]
Post catalytic converter fuel trim (FT), bank 2 - too lean
Status: Test not completed during this operation cycle
----------------------------
P2099(00) [0x209900]
Post catalytic converter fuel trim (FT), bank 2 - too rich
Status: Test not completed during this operation cycle
----------------------------
P2101(00) [0x210100]
Throttle actuator control (TAC) motor - range/performance problem
Status: Test not completed during this operation cycle
----------------------------
P2107(00) [0x210700]
Throttle actuator control (TAC) control module - processor fault
Status: Test not completed during this operation cycle
----------------------------
P2111(00) [0x211100]
Throttle actuator control (TAC) system - actuator stuck open
Status: Test not completed during this operation cycle
----------------------------
P2112(00) [0x211200]
Throttle actuator control (TAC) system - actuator stuck closed
Status: Test not completed during this operation cycle
----------------------------
P2122(00) [0x212200]
Throttle position (TP) or Accelerator pedal position (APP) sensor/switch D - low input
Status: Test not completed during this operation cycle
----------------------------
P2123(00) [0x212300]
Throttle position (TP) or Accelerator pedal position (APP) sensor/switch D - high input
Status: Test not completed during this operation cycle
----------------------------
P2127(00) [0x212700]
Throttle position (TP) or Accelerator pedal position (APP) sensor/switch E - low input
Status: Test not completed during this operation cycle
----------------------------
P2128(00) [0x212800]
Throttle position (TP) or Accelerator pedal position (APP) sensor/switch E - high input
Status: Test not completed during this operation cycle
----------------------------
P2135(00) [0x213500]
Throttle position (TP) or Accelerator pedal position (APP) sensor/switch A/B - voltage correlation
Status: Test not completed during this operation cycle
----------------------------
P2138(00) [0x213800]
Throttle position (TP) or Accelerator pedal position (APP) sensor/switch D/E - voltage correlation
Status: Test not completed during this operation cycle
----------------------------
P2195(00) [0x219500]
Heated oxygen sensor (HO2S) 1, bank 1 - signal stuck lean
Status: Test not completed during this operation cycle
----------------------------
P2196(00) [0x219600]
Heated oxygen sensor (HO2S) 1, bank 1 - signal stuck rich
Status: Test not completed during this operation cycle
----------------------------
P2197(00) [0x219700]
Heated oxygen sensor (HO2S) 1, bank 2 - signal stuck lean
Status: Test not completed during this operation cycle
----------------------------
P2198(00) [0x219800]
Heated oxygen sensor (HO2S) 1, bank 2 - signal stuck rich
Status: Test not completed during this operation cycle
----------------------------
P219A(00) [0x219A00]
Mixture control, bank 1 - value out of range
Status: Test not completed during this operation cycle
----------------------------
P219B(00) [0x219B00]
Mixture control, bank 2 - value out of range
Status: Test not completed during this operation cycle
----------------------------
P2237(00) [0x223700]
Heated oxygen sensor (HO2S) 1, bank 1, positive current control - open circuit
Status: Test not completed during this operation cycle
----------------------------
P2240(00) [0x224000]
Heated oxygen sensor (HO2S) 1, bank 2, positive current control - open circuit
Status: Test not completed during this operation cycle
----------------------------
P2243(00) [0x224300]
Heated oxygen sensor (HO2S) 1, bank 1, reference voltage - open circuit
Status: Test not completed during this operation cycle
----------------------------
P2247(00) [0x224700]
Heated oxygen sensor (HO2S) 1, bank 2, reference voltage - open circuit
Status: Test not completed during this operation cycle
----------------------------
P2251(00) [0x225100]
Heated oxygen sensor (HO2S) 1, bank 1, negative current control - open circuit
Status: Test not completed during this operation cycle
----------------------------
P2254(00) [0x225400]
Heated oxygen sensor (HO2S) 1, bank 2, negative current control - open circuit
Status: Test not completed during this operation cycle
----------------------------
P2270(00) [0x227000]
Heated oxygen sensor (HO2S) 2, bank 1 - signal stuck lean
Status: Test not completed during this operation cycle
----------------------------
P2271(00) [0x227100]
Heated oxygen sensor (HO2S) 2, bank 1 - signal stuck rich
Status: Test not completed during this operation cycle
----------------------------
P2272(00) [0x227200]
Heated oxygen sensor (HO2S) 2, bank 2 - signal stuck lean
Status: Test not completed during this operation cycle
----------------------------
P2273(00) [0x227300]
Heated oxygen sensor (HO2S) 2, bank 2 - signal stuck rich
Status: Test not completed during this operation cycle
----------------------------
P2299(00) [0x229900]
Brake pedal position (BPP) switch/accelerator pedal position (APP) sensor - signals incompatible
Status: Test not completed during this operation cycle
----------------------------
P2610(00) [0x261000]
Engine control module (ECM) - internal engine off timer performance
Status: Test not completed during this operation cycle
----------------------------
P2627(00) [0x262700]
Heated oxygen sensor (HO2S) 1, bank 1, pumping current trim - circuit low
Status: Test not completed during this operation cycle
----------------------------
P2630(00) [0x263000]
Heated oxygen sensor (HO2S) 1, bank 2, pumping current trim - circuit low
Status: Test not completed during this operation cycle
----------------------------
P2A01(00) [0x2A0100]
Heated oxygen sensor (HO2S) 2, bank 1 - circuit range/performance
Status: Test not completed during this operation cycle
----------------------------
P2A04(00) [0x2A0400]
Heated oxygen sensor (HO2S) 2, bank 2 - circuit range/performance
Status: Test not completed during this operation cycle
----------------------------
U0101(00) [0xC10100]
Data bus, transmission control module (TCM) - no communication
Status: Test not completed during this operation cycle
----------------------------
U0140(00) [0xC14000]
Data bus, body control module (BCM) - no communication
Status: Test not completed during this operation cycle
----------------------------
P0977(00) [0x097700]
Shift solenoid (SS) B - circuit high
Status: Test not completed during this operation cycle
----------------------------
P0976(00) [0x097600]
Shift solenoid (SS) B - circuit low
Status: Test not completed during this operation cycle
----------------------------
P0980(00) [0x098000]
Shift solenoid (SS) C - circuit high
Status: Test not completed during this operation cycle
----------------------------
P0979(00) [0x097900]
Shift solenoid (SS) C - circuit low
Status: Test not completed during this operation cycle
----------------------------
P0986(00) [0x098600]
Shift solenoid (SS) E - circuit high
Status: Test not completed during this operation cycle
----------------------------
P0985(00) [0x098500]
Shift solenoid (SS) E - circuit low
Status: Test not completed during this operation cycle
----------------------------
P0999(00) [0x099900]
Shift solenoid (SS) F - circuit high
Status: Test not completed during this operation cycle
----------------------------
P0998(00) [0x099800]
Shift solenoid (SS) F - circuit low
Status: Test not completed during this operation cycle
----------------------------
P0963(00) [0x096300]
Pressure control (PC) solenoid A - circuit high
Status: Test not completed during this operation cycle
----------------------------
P0962(00) [0x096200]
Pressure control (PC) solenoid A - circuit low
Status: Test not completed during this operation cycle
----------------------------
P2763(00) [0x276300]
Torque converter clutch (TCC) pressure control solenoid - circuit high
Status: Test not completed during this operation cycle
----------------------------
P2764(00) [0x276400]
Torque converter clutch (TCC) pressure control solenoid - circuit low
Status: Test not completed during this operation cycle
----------------------------
P0722(00) [0x072200]
Output shaft speed (OSS) sensor - no signal
Status: Test not completed during this operation cycle
----------------------------
P0720(00) [0x072000]
Output shaft speed (OSS) sensor - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0717(00) [0x071700]
Turbine shaft speed (TSS) sensor - no signal
Status: Test not completed during this operation cycle
----------------------------
P0715(00) [0x071500]
Turbine shaft speed (TSS) sensor - circuit malfunction
Status: Test not completed during this operation cycle
----------------------------
P0713(00) [0x071300]
Transmission fluid temperature (TFT) sensor - high input
Status: Test not completed during this operation cycle
----------------------------
P0712(00) [0x071200]
Transmission fluid temperature (TFT) sensor - low input
Status: Test not completed during this operation cycle
----------------------------
P0711(00) [0x071100]
Transmission fluid temperature (TFT) sensor - range/performance problem
Status: Test not completed during this operation cycle
----------------------------
P0819(00) [0x081900]
Transmission gear selection switch, upshift/downshift - correlation to transmission range (TR)
Status: Test not completed during this operation cycle
----------------------------
P0882(00) [0x088200]
Transmission control module (TCM) - power input signal low
Status: Test not completed during this operation cycle
----------------------------
P0883(00) [0x088300]
Transmission control module (TCM) - power input signal high
Status: Test not completed during this operation cycle
----------------------------
P0978(00) [0x097800]
Shift solenoid (SS) C - range/performance problem
Status: Test not completed during this operation cycle
----------------------------
P0984(00) [0x098400]
Shift solenoid (SS) E - range/performance problem
Status: Test not completed during this operation cycle
----------------------------
P0997(00) [0x099700]
Shift solenoid (SS) F - range/performance problem
Status: Test not completed during this operation cycle
----------------------------
P0961(00) [0x096100]
Pressure control (PC) solenoid A - range/performance problem
Status: Test not completed during this operation cycle
----------------------------
P2762(00) [0x276200]
Torque converter clutch (TCC) pressure control solenoid - range/performance problem
Status: Test not completed during this operation cycle
----------------------------
P0817(00) [0x081700]
Starter disable circuit - malfunction
Status: Test not completed during this operation cycle
----------------------------
P1783(00) [0x178300]
Transmission Overtemperature Condition
Transmission Fluid Temperature High Input
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P1719(00) [0x171900]
Engine Torque Signal
Status: Test not completed during this operation cycle
----------------------------
U0415(00) [0xC41500]
Invalid data received - anti-lock brake system (ABS) control module
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P073F(00) [0x073F00]
Transmission system - unable to engage gear 1
Status: Test not completed during this operation cycle
----------------------------
P0732(00) [0x073200]
Gear 2 - incorrect ratio
Status: Test not completed during this operation cycle
----------------------------
P0733(00) [0x073300]
Gear 3 - incorrect ratio
Status: Test not completed during this operation cycle
----------------------------
P0734(00) [0x073400]
Gear 4 - incorrect ratio
Status: Test not completed during this operation cycle
----------------------------
P0735(00) [0x073500]
Gear 5 - incorrect ratio
Status: Test not completed during this operation cycle
----------------------------
P0729(00) [0x072900]
Gear 6 - incorrect ratio
Status: Test not completed during this operation cycle
----------------------------
P0730(00) [0x073000]
Incorrect gear ratio
Status: Test not completed during this operation cycle
----------------------------
P0731(00) [0x073100]
Gear 1 - incorrect ratio
Status: Test not completed during this operation cycle
----------------------------
P072D(00) [0x072D00]
Transmission system - stuck in gear 2
Status: Test not completed during this operation cycle
----------------------------
P074A(00) [0x074A00]
Transmission system - unable to engage gear 2
Status: Test not completed during this operation cycle
----------------------------
P074B(00) [0x074B00]
Transmission system - unable to engage gear 3
Status: Test not completed during this operation cycle
----------------------------
P074C(00) [0x074C00]
Transmission system - unable to engage gear 4
Status: Test not completed during this operation cycle
----------------------------
P074D(00) [0x074D00]
Transmission system - unable to engage gear 5
Status: Test not completed during this operation cycle
----------------------------
P074E(00) [0x074E00]
Transmission system - unable to engage gear 6
Status: Test not completed during this operation cycle
----------------------------
P2757(00) [0x275700]
Torque converter clutch (TCC) pressure control solenoid - performance problem or solenoid stuck off
Status: Test not completed during this operation cycle
----------------------------
P0762(00) [0x076200]
Shift solenoid (SS) C - stuck on
Status: Test not completed during this operation cycle
----------------------------
P0766(00) [0x076600]
Shift solenoid (SS) D - performance or stuck off
Status: Test not completed during this operation cycle
----------------------------
P0771(00) [0x077100]
Shift solenoid (SS) E - performance or stuck off
Status: Test not completed during this operation cycle
----------------------------
P2708(00) [0x270800]
Shift solenoid (SS) F - solenoid stuck on
Status: Test not completed during this operation cycle
----------------------------
P1738(00) [0x173800]
Shift Time Error
Shift Time Error
Status: Test not completed during this operation cycle
----------------------------
P0942(00) [0x094200]
Hydraulic pressure unit
Status: Test not completed during this operation cycle
----------------------------
P1700(00) [0x170000]
Transmission Indeterminate Failure (Failed to Neutral)
Status: Test not completed during this operation cycle
----------------------------
P0867(00) [0x086700]
Transmission fluid pressure (TFP) sensor
Status: Test not completed during this operation cycle
============================
Engine control unitEngine control unit
DTCs: 1
----------------------------
P0451(00) [0x045100] Archive (inactive)
Evaporative emission (EVAP) pressure sensor - range/performance problem
Status: Confirmed, Test failed since last DTC clear, Test not completed during this operation cycle
============================
Transmission control unit
No DTC found.
============================
ABS control unit
No DTC found.
============================
DashboardDashboard
DTCs: 4
----------------------------
U2616 [0xE616]
Status: Validated and stored in non volatile memory, Validated fault has been present during this drive cycle
----------------------------
U2617 [0xE617]
Status: Validated and stored in non volatile memory, Validated fault has been present during this drive cycle
----------------------------
U2618 [0xE618]
Status: Validated and stored in non volatile memory, Validated fault has been present during this drive cycle
----------------------------
U2619 [0xE619]
Status: Validated and stored in non volatile memory, Validated fault has been present during this drive cycle
============================
BCM
No DTC found.
============================
SRS/Airbag
No DTC found.